Beyerdynamic BLUE BYRD - Case Storage and Eartip Management

Blue BYRD – In-ear Headphones
9
english
Pairing with the player
Before you use the in-ear headphones for the fir time, you have to pair them with your mobile phone
or another Bluetooth® enabled device. The pairing process may be dierent with various players.
Please refer to the appropriate manual of the player.
1. When the in-ear headphones are turned o,
press the multifunction button  for
6 seconds to a the pairing mode.
2. The LED on the rear of the remote control will
flash alternately blue and red.
3. Activate the Bluetooth® function on the
player and, if necessary, search for new
devices.
4. Select “Blue BYRD” from the available
devices in the Bluetooth® menu of the player
and connect both devices.
5. The LED on the rear of the remote control
displays a successful Bluetooth® connection
by a blue light. Each time when turning on,
both devices connect automatically when in
range.
Multi point operation
The in-ear headphone can be paired to a maximum of 15 Bluetooth® enabled devices. Active
connections can be eablished with up to two devices at a time. However, playback of music and
phone operation is only possible with one device at a time. Phone operation has priority over playback
of music; i. e. playback of music is interrupted during phone calls.
The following priorities apply during the use of playback devices:
Priority Profile Playback device (PD)
1 HFP (phone operation) AG 1 (device used fir)
2 HFP (phone operation) AG 2 (device used second)
3 A2DP (playback of music) AG 1 (device used fir)
4 A2DP (playback of music) AG 2 (device used second)
Setting up multi point
• Pair the in-ear headphone with the fir device (refer to “Pairing with the player”).
• Deactivate the Bluetooth® connection on the fir device.
• Switch the in-ear headphones o.
• Pair the in-ear headphones with the second device (refer to “Pairing with the player”).
• Re-activate the Bluetooth® connection to the fir device that automatically connects to the in-ear
headphones.
• Once both devices are paired with the in-ear headphones, the in-ear headphones automatically
connect with both devices each time they are powered up.
All manuals and user guides at all-guides.com