Beyerdynamic PRO X Series User Manual

For more information download the manual at:
www.beyerdynamic.com/pro-x
beyerdynamic GmbH & Co. KG
Theresienraße 8 • 74072 Heilbronn / Germany
Tel. +49 7131 617-300 • info@beyerdynamic.com
PRO X Inructions (08.21) • 695319 • Printed in Germany • Subject to change without notice

Beyerdynamic PRO X Series Specifications

General

Driver Type	Dynamic
Series	PRO X
Impedance	48 ohms
Frequency Response	5 Hz - 40 kHz
Cable Length	3.0 m (9.8 ft)
Connector	3.5 mm jack
Earpads	Velour
Weight	350 g (without cable)

Summary

Connecting and Disconnecting the Cable

Connecting the Cable

Connect the 3-pin mini XLR cable to the headphones, ensuring the release button faces outward and the connector locks.

Disconnecting the Cable

Press the release button and pull the cable connector from the headphones to disconnect.

Changing Ear Pads

Removing Ear Pads

Carefully pull apart the gap between the housing and ear pads using fingertips or a blunt object to remove.

Attaching Ear Pads

Align the snap-in nose of the ear pad, press gently with palm until the ring snaps into place.

Changing the Headband Pad

Removing Headband Pad

Pull the silicon strap carefully until all hooks of the headband pad are released.

Attaching Headband Pad

Align the snap-in nose on the right side, then press the pad gently until hooks snap into place.