The unit should be mounted via its screw holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration and slipping while operating.
And make sure that the structure to which you are attaching the unit is secure
and is able to support a weight of 10 times of the unit’s weight. Also always use a
safety cable that can hold 12 times of the weight of the unit when installing the
fixture.
The equipment must be fixed by professionals. And it must be fixed at a place
where is out of the touch of people.
2. Technical Specifications
Light Sources: 7x 40W 4in1 RGBW LED
Beam Angle: 6°~ 55°
Power Consumption: 300W
Power Voltage: AC 100-240V, 50/60Hz
Dimension: 26*21*42 cm
Packing size: 47x53x38cm
Net Weight: 8.35 Kgs
Gross Weight: 10.5 Kgs
Control
DMX Channel: 17 Channel
Control Modes: DMX512/mater-Slave/Auto Run/Music
Pan/Tilt
Pan/Tilt: 540°/ 270°
Pan/Tilt Resolution: 8/16 bit
Construction
Display: 180°reversed LCD colorful Display
Data In/Out socket: 3-pin XLR sockets
Power Socket: Powercon in/out
Protection Rating: IP20
To Next Page
Loading...