The PIR motion detector has a range of up-to 10 meters with approximate angles of 90 degrees vertical
and 120 degrees horizontal. Install the rotary mounting bracket to the wall at an appropriate position
within the detected area.
1 Press the "ARM" button on the remote fob.
2 One ”beep” will be sounded as an indication that the unit has armed.
3 The alarm will be activated after 30 seconds.
Disarming the Main Unit :
1 Press the "CLR" button on the remote fob.
2 One “beep” will be sounded as an indication that the unit has disarmed.
Pairing with other devices
CX901 (the wireless GSM PIR motion alarm) is a master unit. It can be paired with different slave units
such as PIR video camera, PIR motion sensor alarm, door and window sensor alarm, mini siren box etc.
All of the below models are compatible with CX901. Once they learn the programme code from the
same remote fob as CX901, they can be paired with CX901 to construct the whole alarm system.
CX801 /CX802 / CX803 / CX804 / CX806 /CXMH807 / CX301 / CX302
Please check with the supplier of the GSM SIM card that they have sufficient network coverage for the
area that the CX901 is intended to be installed.
To Previous Page
Loading...