enabled, the two-way radio will be kept in this mode before pressing this key to
disable this function.
7. Unused channel deletion: enable a user to temporarily delete unnecessary
channels from the scan list (excluding selected channels). For example, when
the two-way radio is powered off and on again, deleted unused channels will
resume in the scan list.
8. Single-key call 1: enable a user to perform digital group call, digital private call,
call prompt or send quick SMS.
9. Single-key call 2: same as single-key call 1.
10. Single-key call 2: same as single-key call 1.
11. Single-key call 2: same as single-key call 1.
12. Single-key call 2: same as single-key call 1.
13. Single-key call 2: same as single-key call 1.
14. Repeater/talk-around: enable a handset to connect or communicate via the
repeater or enable talk-around communication beyond the repeater.(prompt tone
- "1" indicates repeater and "2" indicates "talk-around".)
15. Unset: not assign any function to programmable keys.
16. Area switching: enable a user to switch between two areas. Note: each area has 10
channels. It has two areas totally. (prompt tone -"1" indicates area 1, and 2 indicates
area 2.)
17. Scan ON/OFF: enable a user to turn ON or OFF scan feature. (prompt tone:
scan ON and scan OFF)
18. Access authentication ON/OFF: enable a user to operate in normal mode and
safe mode. (prompt tone 1 indicates ON and 2 indicates OFF)
19. Disconnection: enable a user to disconnect from the relay. (prompt
tone instead of voice)
Note: above key functions can be realized by long or short
press on keys.
Keys
1）Short press of orange key
Enable a user to change short press of orange key. It has the same function as
above.
2）Long press of orange keys
Enable a user to change long press of orange keys. It has the same function as
above.
3）short press of key 1
To Next Page
Loading...