2）Call type
Enable a user to select a call type from selected call members in the “call object”
column.
1. SMS
Enable a user to select quick SMS. These SMS are selected from SMS setting.
SMS
A user can input 138 characters at most. Valid characters include alphanumeric
characters, space and special characters. A user can send SMS by setting short
press or long press programmable key (SMS).
This feature can be used to predefine SMS. These SMS (also known as quick
SMS) are common ones repeatedly sent and stored in the two-way radio. A user
does not have to input same contents repeatedly. A user can add 10 SMS to the
“predefined SMS” list at most. For non-digital LCD two-way radios, a user can
only assign long press or short press to single-key call to realize this. This model
has no menu to receive or display incoming SMS, nor a menu to select quick
SMS. This function can be ignored for non-LCD two-way radio.
Emergency System
Alarm is a non-voice signal that can trigger alarm to the other two-way radio. This
function can be ignored (enabled only for LCD digital two-way radio).
Address book
Call type
1. Private call: a call sent by a two-way radio to the other two-way radio.
2. Group call (G): a call sent by a two-way radio to a group of two-way radios.
3. All call (A): a one-way call sent by a two-way radio to all two-way radios in the
channel.
Channel
The two-way radio supports two areas with 16 channels supported for each area. Total
32 channels are supported.
1）Add area
1. Right click “Channel” folder in the view.
Select “Add (A)”.
To Next Page
Loading...