members in the scan list, if a user presses PTT, the two-way radio will perform
transmission in the TX channel. Any channel can be used as a specified TX
channel. In addition, a user can select a selected channel.
9）Priority sampling time (ms)
The time to wait before the two-way radio scans the priority channel when
setting a call. If a call is initiated in the top priority channel, scanning will not be
performed. The two-way radio will temporarily make current transmission mute
when scanning the priority channel. Increase of this interval can reduce check
times to improve the quality of currently-transmitted audio, but this also
increases the possibility of the two-way radio missing an activity in the priority
channel.
Technical specifications
To Next Page
Loading...