BFISPORT EB20-02F - User Manual

Identifies the specific e-bike model EB20-02F and its type.

Emphasizes writing down the key number for replacement keys and its importance.

Stresses reading instructions, checking local laws, and ensuring mechanical condition.

Advises wearing helmets, protective gear, appropriate clothing, and being aware of surroundings.

Specifies suitable surfaces, load limits, and operational assistance.

Details automatic deactivation of assistance at 25 km/h and stopping pedalling.

Covers checks before first use, including safety checklist and brake adjustment.

Advises on re-checking adjustments after 4 weeks or 300 km for optimal performance.

Outlines requirements for lights, reflectors, and bells for legal operation.

Suggests insurance and emphasizes cyclist's responsibility for respecting traffic laws.

Lists 15 points to check for safe operation and mechanical integrity.

Provides advice on screw tightening, wheel truing, and component repair by experts.

Covers health, avoiding substances, calibration, and riding techniques.

Details how to secure the e-bike for transport on vehicles and protect it from damage.

Recommends annual inspection by an expert for hidden damages and wear.

Guides on using suitable parts, cleaning methods, and avoiding water immersion.

Covers battery charging frequency, temperature, and disposal guidelines.

Details how to clean the e-bike, chain, and gears to prevent rust and damage.

Advises on storing in a dry place, deactivating the system, and protecting from humidity.

Explains the three buttons and the power on/off function of the display.

Describes light indicator behavior and battery level indicators.

Explains when the brake indicator symbol will turn on.

Details the five PAS speed levels and how to select them.

Explains how to activate and use the push-assistance function.

Describes the USB port on the display for charging devices.

Explains how to display running, average, and max speed in Km/h or Mph.

Lists indicators for cruise function and potential failures (motor, wheel, controller).

Explains display of total distance, trip distance, and battery output voltage.

Describes how to enter and navigate the parameter setting mode.

Details codes for factory reset, backlight, mileage units, and ODO reset.

Explains that error codes indicate communication problems and require contacting support.

Explains how to turn on the front light and ring the horn using display buttons.

Covers assembly of the functional LCD display with USB port and handlebar.

Describes the foldable frame and stem assembly process.

Shows the front light and its placement on the bike.

Highlights off-road fat tires and the impressive rear motor.

Details inserting the seat post, adjusting height, and securing it.

Explains how to screw in pedals by hand and tighten with a wrench.

Outlines the procedure for turning off the bike, ensuring the port is dry, and connecting the charger.

Explains the red to green indicator light and the time taken for full charge.

Advises on safe charging environments, options for charging, and USB port usage.

Explains how to use the derailleur switch to change gears.

Details steps for folding the handlebar and lowering the saddle.

Explains how to release locks and fold the main frame of the e-bike.

Warns against unsuitable chargers, damaged chargers, and improper charging environments.

Covers mains compatibility, indoor use, reach of children, and avoiding hazards.

Prohibits off-road use, driving under influence, and specifies age/weight restrictions.

Explains how to clean the e-bike and prohibits high-pressure water flushing.

Advises ensuring full charge before storage and avoiding low temperatures.

Instructs on separating batteries from household waste for recycling.

Details how to dispose of the product and its parts at suitable recycling centres.

Outlines the warranty period for the e-bike and battery, and exclusions.

Declares that the product conforms to EN15194 directive.