EasyManua.ls Logo

BFM Europe Eden HE MK2 User Manual

BFM Europe Eden HE MK2
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Eden HE MK2
HIGH EFFICIENCY BALANCED FLUE
INSET ROOM HEATER
Installation, Maintenance & User Instructions
Hand these instructions to the user
Model No’s BBFG**RN2 is for use on Natural Gas (G20) at a supply pressure
of 20 mbar in G.B. / I.E.
Model No’s BBFG**RP2 is for use on Propane Gas (G31) at a supply
pressure of 37 mbar in G.B. / I.E.
** Denotes trim & colour variant

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the BFM Europe Eden HE MK2 and is the answer not in the manual?

BFM Europe Eden HE MK2 Specifications

General IconGeneral
BrandBFM Europe
ModelEden HE MK2
CategoryGas Heater
LanguageEnglish

Summary

Section 1: Information and Requirements

Appliance Information

Details appliance specifications, including injector types, pilot type, heat input, and electrical requirements.

Conditions of Installation

Outlines legal and regulatory requirements for installing gas appliances by qualified professionals.

Flue Terminal Position

Specifies minimum acceptable dimensions for flue terminal placement relative to obstructions and openings.

Section 2: Installation of Fire

Preparation of the Combustion Chamber Opening

Details required dimensions and clearances for preparing studwork or chimney breast openings for the combustion chamber.

Installation of the Gas Supply

Guidance on planning and connecting the gas supply to the appliance from various entry points.

Specifying the Flue System & Components

Details required flue lengths, components in the standard kit, and telescopic pipe specifications.

Making the Electrical Connection

Guidelines for safely connecting the appliance to the mains electricity supply, emphasizing earthing.

Section 3: Fuel Bed and Lighting

Fitting the Fuel-Bed Logset

Step-by-step guide on how to correctly arrange the ceramic logs on the burner tray for realistic appearance.

Lighting & Operation of the Fire

Guide to operating the fire using the remote handset, including different modes and safety notes.

Section 4: Maintenance

Removing the Burner Assembly

Detailed steps for safely removing the burner assembly for servicing or replacement.

Wiring Diagram

Electrical schematic showing the connections between the appliance components and the control module.

Section 5: User Instructions

Lighting the Appliance

Step-by-step guide on how to safely light and operate the gas fire using the remote control.

Cleaning

Important safety warnings and instructions for cleaning the appliance's enamelled parts and fuel bed.

User Replaceable Parts

List of parts that users can replace, along with their corresponding part numbers.