BFM Europe GICCI2MN User Manual

HE Cast Range
Full Depth Open Fronted Convector Gas Fire
High Efficiency Cast Iron Fireplaces
Installation, Maintenance & User Instructions
Hand these instructions to the owner following installation
Model No’s GICCI2MN & GICCI2RN are only for use on Natural Gas
(G20) at a supply pressure of 20 mbar in G.B. / I.E.

BFM Europe GICCI2MN Specifications

General

Brand	BFM Europe
Model	GICCI2MN
Category	Indoor Fireplace
Language	English

Summary

Section 1: Information and Requirements

Appliance Information

Conditions of Installation

Outlines legal, building, and British Standard requirements for installation.

Flue and Chimney Suitability

Specifies minimum flue dimensions and suitability for different flue types.

Fireplace and Surround Suitability

Shelf Position and Chimney Inspection

Fireplace Opening and Catchment Space

Defines required dimensions for the fireplace opening and catchment space.

Hearth Requirements

Spillage Monitoring System

Explains the function and important warnings for the spillage monitoring system.

Section 2: Installation of Fire

Installing the Fire Box

Step-by-step guide for fitting the fire box into various flue types.

Gas Tightness and Inlet Pressure Testing

Procedures for testing gas tightness and verifying inlet pressure for all models.

Section 3: Assembling Fuel Bed and Commissioning

Assembling the Fuel Bed and Ceramics

Lighting the Appliance (Manual Control)

Step-by-step guide for lighting the fire using manual controls.

Lighting the Appliance (Remote Control)

Combustion Product Clearance Test

Procedure for performing a spillage test to ensure safe operation.

Section 5: User Instructions

Installation Information and Safety Warnings

Operating the Fire (Manual Control)

Operating the Fire (Remote Control)

Emergency Shut-off and Cleaning

Procedures for emergency shut-off and general cleaning of the appliance.