BFM Gallery Arch Tray NG2 Series User Manual

Arch Tray NG2
Insert
DECORATIVE FUEL EFFECT GAS FIRE
For Use With Gallery Cast Iron Insert (s)
THIS PRODUCT IS NOT SUITABLE FOR
PRIMARY HEATING PURPOSES
Installation, Maintenance & User Instructions
Hand these instructions to the user
Model No. GATCXXMN is for use on Natural Gas (G20) at a supply
pressure of 20 mbar in G.B. / I.E.

BFM Gallery Arch Tray NG2 Series Specifications

General

Brand	BFM
Model	Gallery Arch Tray NG2 Series
Category	Indoor Fireplace
Language	English

Summary

Section 1 Information and Requirements

Appliance Information

Conditions of Installation

Outlines legal and regulatory requirements for installing gas appliances.

Flue and Chimney Suitability

Specifies minimum dimensions and types of flues/chimneys suitable for the appliance.

Fireplace and Surround Suitability

Flue and Chimney Inspection

Provides steps for inspecting the flue for obstructions, condition, and updraught.

Fireplace Opening and Catchment Space

Fitting to Brickbuilt Chimneys

Fitting to Metal Flue Boxes

Hearth Requirements

Spillage Monitoring System Warnings

Lists important warnings regarding the operation and adjustment of the spillage monitoring system.

Section 2 Installation of Fire

Installing the Fire Tray

Section 3 Assembling Fuel Bed and Commissioning

Assembling the Fuel Bed (Coal Models)

Section Five - User Instructions

Operating the Fire

Step-by-step guide for lighting, adjusting flame, and operating the fire safely.

Section Six - Trouble Shooting Charts

Troubleshooting: Burner Will Not Light

A flowchart to diagnose and resolve issues preventing the burner from igniting.

Troubleshooting: Burner Will Not Stay Lit