BFT LIBRA - Page 6

LIBRA - Ver. 06 - 15
D811323_06
Fig. B
DEFAULT
P1
T1
T2
T1
T2
T3
T4
TRC 1-2
TRC 4
FIG. 1A
FIG. 2A
TRC 1-2
TRC 4
MITTO 2-4
T
1 T2
T1 T2
T3
T4
P1
RADIO
AUTOSET MENU
It automatically sets the motor torque.
WARNING! During the autoset phase, the obstacle
detection function is not active, therefore the installer
must control the automation movement and prevent
persons and things from approaching or standing
within the automation working range.
PRECEDING MENUS
FIG. A
OK
OK
-
+
-
+
-
+
-
+
+ / -
END
+ / -
END
Press P1 (pushbutton) on radio
control device Ð see Fig. 1A
Press the required T (key) on
radio control device Ð see Fig. 2A
Press the required T (key) on
radio control device Ð see Fig. 2A
Release P1 on radio
control device
ADD start hidden button release
desired button
01
erase 1
PRG.
READ
RADIO MENU
ADD - Allows you to add one key of a radio control
device to the receiver memory; after storage it displays
a message showing the receiver number in the
memory location (from 01 to 64).
Add Start button Ð associates the required key to
Start command
Add 2ch button Ð associates the required key to 2nd
radio channel
READ - Checks one key on a receiver, if stored it
displays a message showing the receiver number in
the memory location (from 01 to 64), and the key
number (T1, T2, T3 or T4).
ERASE 1 - Removes one single key of a transmitter
from the receiver memory; after deletion it displays a
message showing the receiver number in the memory
location (from 01 to 64).
ERASE 64
WARNING! Completely removes all memorised radio
control devices from the receiver memory.
01
OK OK
OK
Press P1 (pushbutton) on radio
control device Ð see Fig. 1A
Press the required T (key) on
radio control device Ð see Fig. 2A
Release P1 on radio
control device
hidden button release
desired button
OK
OK
+ / -
ERASE 64
-
+
-
+
-
+
Press P1 (pushbutton) on radio
control device Ð see Fig. 1A
Press the required T (key) on
radio control device Ð see Fig. 2A
Release P1 on radio
control device
ADD 2ch hidden button release
desired button
01
OK
-
+
. . . . . .
OK
AUTOset
+ / -
END
language
ITA
FRA
DEU
ENG
esp
OK OK
OK
OK
OK
OK
+ / -
END
-
+
-
+
-
+
-
+
OK
OK
01 t1
PRG