BFT PHOBOS BT - User Manual

PHOBOS BT
ELECTROMECHANICAL
LOW-VOLTAGE
AUTOMATION FOR
SWING GATES
D811316 10-11-01 Vers. 02

Summary

1) GENERAL SAFETY

3) TECHNICAL SPECIFICATIONS

4) INSTALLATION OF THE ACTUATOR

4.1) Preliminary checks

Checks to perform before starting the actuator installation.

4.4) Mounting the brackets to the gate-post and to the gate.

Instructions for attaching mounting brackets to gate and post.

5) GROUND GATE STOPS

6) THE ELECTRICAL PLANT SET-UP

7) ADJUSTING THE PUSHING FORCE

8) ADJUSTMENT OF THE LIMITING DEVICES

8.1) Adjustment of the closing limiting devices

How to adjust the end-of-stroke sensors for closing.

8.2) Adjustment of the opening limiting devices

9) MANUAL OPENING

11) CHECKING THE AUTOMATION

12) USE OF THE AUTOMATION

13) THE CONTROLS

14) MAINTENANCE

18) TROUBLES AND SOLUTIONS

18.1) Incorrect operation of gearmotor

BFT PHOBOS BT Specifications

General

Operating Temperature	-20°C to +55°C
Bluetooth Control	Yes
Motor Power Supply	24 V
Power Input	230 V
Locking	Electromechanical