DELETING A CODE
WARNING:
if you delete the last code, you will no longer be able to activate the relevant control unit. To restore
ope-ration, you must perform the total deletion procedure to erase all codes and repeat installation from the
beginning. It is advisable to delete the codes of channels that are not associated with anything (e.g. code 2222, 3333,
4444, 0000 etc. when using a single control unit).
1 2
Timeout 20’’
Code to be deleted
Code to be deleted
Timeout 20’’
Code deleted!
3 4
5 6
5”
18 - Q.BO TOUCH Q.BO TOUCH - 19
D812039 00100_02
To Next Page
Loading...
