To Next PageTo Next Page
Need help?Do you have a question about the BFT RME R Series and is the answer not in the manual?
General| Operating Temperature | -20°C to +60°C |
|---|---|
| Type | Magnetic contact |
| Power supply | 24 V AC/DC |
| Output Contact | 1A @ 30V DC |
| Load Capacity | 1A @ 30V DC |
Details the RRME and RME BT loop detectors and their typical use cases in parking and access control.
Explains core features like reset switch, sensitivity, frequency selection, and status indicators.
Covers common symptoms related to POWER, DETECT, and LOOP FAULT LEDs for troubleshooting.
Details power requirements, response time, tuning range, protection, and connector type.
Provides specifications for detector dimensions and operating temperature range.
Guides on configuring DIP switches for RME 1 and RME 2 models, including channel-specific settings.
Details the functionality of Presence and Pulse relays under different vehicle and loop conditions.
Step-by-step instructions for cutting slots, wiring loops, twisting feeders, and positioning for optimal detection.
