EasyManua.ls Logo

BFW Long Island Technology Group Hatteras - User Manual

BFW Long Island Technology Group Hatteras
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
LED Light Source
Operating Manual
Hatteras
TM

Questions and Answers

  • D
    Darren FergusonAug 9, 2025
    What to do if 'Er1' appears on my BFW Long Island Technology Group Hatteras Medical Equipment display?
    • L
      Laura SmithAug 9, 2025
      If the BFW Medical Equipment HatterasTM shows 'Er1' in the display, it means the LED has reached a critical temperature and shut itself off for safety. Clear any objects blocking the vents or generating heat around the device.
  • D
    Deborah McknightAug 14, 2025
    What does 'Er0' mean on my BFW Medical Equipment?
    • V
      vbarrettAug 14, 2025
      If the BFW Medical Equipment HatterasTM shows 'Er0' in the display, the LED is operating warmer than normal. Make sure that there are no objects around the HatterasTM blocking the vents or producing heat.
  • A
    andres87Aug 19, 2025
    How to troubleshoot no power on my BFW Long Island Technology Group Hatteras?
    • Q
      qsanchezAug 19, 2025
      If your BFW Medical Equipment HatterasTM has no power, check these possible causes: * The main power cord might not be plugged into the socket - plug it in. * The main power switch might not be fully engaged - toggle the ON/OFF switch. If these steps don't work, the fuse may be blown or an internal component might not be working. In this case, return the HatterasTM to the manufacturer for service.
  • D
    dhartmanAug 25, 2025
    What to do if the light does not illuminate on BFW Long Island Technology Group Hatteras Medical Equipment?
    • M
      Michele RamirezAug 26, 2025
      If the light on your BFW Medical Equipment HatterasTM isn't illuminating, the fiber might not be fully inserted into the active port. Push the fiber into the active port until it clicks. If that doesn't work, an internal component may not be functioning, and you should return the HatterasTM to the manufacturer for service.
  • D
    Dr. James PhillipsAug 29, 2025
    Why does 'Er2' appear on the display of my BFW Long Island Technology Group Hatteras Medical Equipment?
    • G
      gwalkerAug 29, 2025
      If you see 'Er2' on the display of your BFW Medical Equipment HatterasTM, it indicates that one of the fans has stalled. Check the vents and remove any obstructions.
  • E
    Emily GordonSep 3, 2025
    Why is the light output low on my BFW Medical Equipment?
    • N
      njonesSep 3, 2025
      If your BFW Medical Equipment HatterasTM has low light output, the LED might be nearing the end of its life, or the fiber optic cable could be damaged. Try replacing the fiber optic cable. If the issue persists, return the HatterasTM to the manufacturer for service, as the LED may be nearing the end of its life.

BFW Long Island Technology Group Hatteras Specifications

General IconGeneral
BrandBFW
ModelLong Island Technology Group Hatteras
CategoryMedical Equipment
LanguageEnglish