26
EPIC 2-manual-EN-v1.2 April 2022
Lines should be symmetrically placed on the tab, except where the tab is inclined. The tab is inclined backwards on
the A tabs of all BGD gliders to align it with the direction of pull of the line. So when assembling the lines, the A tab
should be angled back, and the B, C and D tabs should be perpendicular.
Environmental protection and recycling
Our sport takes place in the natural environment, and we should do everything to preserve our environment. A glider
is basically made of nylon, synthetic bres and metal. At the end of your paraglider’s life, please remove all metal
parts and put the different materials in an appropriate waste/recycling plant.
Maintenance
To Next Page
Loading...