33
EPIC 2-manual-EN-v1.2 April 2022
Technical data
8. Technical data
Line Lengths
All measures are in mm, with 50N line tension, the tension being slowly and gradually applied before taking the
measurement. The lengths are measured from the lower surface of the canopy and include the risers.
Compliance of the test sample’s suspension lines, control lines and risers with the dimensions given in the user’s
manual are checked by the testing laboratory after the test ights have been completed
The difference in line lengths between the manual and the sample may be no more than 10mm. The measured lengths
are in the appendix.
To Next Page
Loading...