6
EPIC 2-manual-EN-v1.2 April 2022
Harness
The paraglider was tested with a ‘GH’ (without diagonal bracing) type harness. The GH category includes weight-shift
harnesses as well as ABS style (semi-stable) harnesses.
The EN standard harness dimensions are a seat board width of 42cm.
The horizontal distance between the attachment points of the paraglider risers (measured from the centre line of the
karabiners) should be:
• 38cm for pilots under 50kg
• 42cm for pilots from 50-80kg
• 46cm for pilots above 80kg
Introduction
To Next Page
Loading...