SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0
F5 6 e s s a r t S r e s u k r e v e Lax +49 (0) 2191 / 46438-40
e d . l h a t s w s @ o f n i : l i
a M - Ed i e h c s m e R 7 9 8 2 4 - D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
BGS 1907 / 1908 / 1909 / 1914 / 1915
Bolt Cutter with Hardened Jaws
SPECIFICATIONS
ATTENTION
Read the operating instructions and the safety instructions contained in them carefully before using
the product.
Use the product correctly, with caution and only for the purpose for which it is intended.
Failure to follow safety instructions can result in damage, injury, and void the warranty.
Keep these instructions in a safe, dry place for future reference.
Include the user manual if you pass the product on to third parties.
INTENDED USE
The bolt cutters are used for cutting or crushing hard materials.
For diameters from 4 mm to 12 mm (depending on the hardness of the material to be cut).
SAFETY INFORMATIONS
• Keep fingers away from the cutting edges.
• The cutting edges can be sharp and can cause serious injury.
• Do not use the bolt cutters for other, inappropriate work.
• Do not rotate the bolt cutters during use
• Read the operating instructions and the included safety information included carefully before
using the product.
• Keep children and unauthorized persons away from the work area.
• Do not let children play with this product or its packaging.
• Make sure that the work area is adequately illuminated.
• Keep the work area clean, tidy, dry and free of other materials.
• Do not let untrained people work with this tool set.
To Next Page
Loading...
Need help?
General