BGS technic 9872 User Manual

SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0
F 56 essartS resukreveL ax +49 (0) 2191 / 46438-40
ed.lhatsws@ofni :liaM-E diehcsmeR 79824-D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 9872
Pocket Gas Torch
GENERAL INFORMATION
Its high flame temperature of the pocket gas torch is suitable for
soldering, flambé, and therefore finds use in the workshop and kitchen.
The torch is equipped with piezo-ignition, lock switch and flame size
regulator. The gas tank with 10g volume can be filled with conventional
lighter gas.
WARNINGS
Please read all the instructions and warnings before use.
 If you use butane, please reverse the torch gun and push butane cylinder
against the gas charging valve. After charging, wait several minutes until the
gas is stabilized.
 Be careful when use the torch gun near the fire source, heater or inflammable.
 Please don't touch the nozzle while using or immediately after use, otherwise you may get scalded.
 Please make sure there is no flame in the product and it has already been cooled down before
storing.
 A dismantling or repairing is permitted only trained persons.
 Do not use the gas burner continue, make occasionally a cool down break.
 ATTENTION: Use only butane gas, any other gases are not allowed !
OPERATION
Fill Valve (1)
The filling valve for filling the pocket gas torch is located in the
bottom part. For filling, press the adapter of the filler bottle to the fill
valve. Wait a few minutes after filling until the gas has built up a
uniform pressure.
Locking Switch / Trigger (2)
Turn the locking switch from Close to Open position before ignition.
Press the trigger.
Turn the locking switch from Open to Close position if you want to
operate continuously. The fire will remain burn.
Turn the locking switch from Open to Close position when you store
up the torch gun.
Flame Adjusting Pusher (3)
Use the adjusting pusher to control the flame size
-
+
Open
Close
1
2
3

BGS technic 9872 Specifications

General

Brand	BGS technic
Model	9872
Category	Flashlight
Language	English