Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 W
ermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@
bgs-technic.de
www.bgstechnic.com
Operation
Possible Messages
YES All monitoring programs supported on the vehicle have
completed their diagnostic testing and the MIL light is not on
NO At least one monitoring supported on the vehicle has not
completed its diagnostic testing, and/or the “Check Engine” (MIL)
light is on
READY Indicates that a particular monitoring being checked has
completed its diagnostic testing
Not RDY indicates that a particular monitoring being checked has not
(NOT READY) completed its diagnostic testing
N/A The monitoring is not supported on that vehicle
“” a flashing Right Arrow indicates additional information is
available on the next screen
“” a flashing Left Arrow indicates that the last screen has been
reached. Pressing Forward again will lead to the first message
Select 3.I/M from the main menu by pressing the OK button.
Press the Forward button to view the status of the MIL light
(“ON” or “OFF”) and following monitoring programs:
MISFIRE Misfire monitoring
FUEL Fuel System Monitoring
CCM Comprehensive Components Monitoring
EGR EGR System Monitoring
O2S O2 Sensors Monitoring
AT Catalyst Monitoring
EVAP Evaporative System Monitoring
HO2S O2 Sensor Heater Monitoring
2AIR Secondary Air Monitoring
HCM Heated Catalyst Monitoring
A/C A/C System Monitor
Press the OK button to return to the main menu.
MENU:
3.1/M
To Next Page
Loading...
Need help?
General