Need help?Do you have a question about the BH Emotion and is the answer not in the manual?
General| Brakes | Hydraulic disc brakes |
|---|---|
| Frame | Aluminum |
| Fork | Suspension |
| Suspension | Front suspension fork |
| Display | Shimano Steps |
Explains the components and operation of the pedal assistance system.
Describes using the bicycle without electric assistance.
Provides guidance on how to begin pedalling safely.
Overview of the display panel and its functions.
Details the various operations and functions of the display panel.
Instructions on how to detach and reattach the display panel.
How to activate and deactivate the pedal assistance system.
Guide to choosing the desired level of electric assistance.
How to control the bicycle's lights and display backlight.
How to cycle through and view different data on the display.
Explanation of how to read the battery charge level.
How to set the bicycle's wheel size for accurate readings.
Details on the low-speed throttle feature.
Information about the accelerator for specific models.
How to interpret system error codes and what to do.
Explains the type of battery technology used in the bicycle.
Factors affecting the bicycle's range on a single charge.
Instructions for charging the battery, with specific steps for different mounting types.
How to check the battery level using LED indicators on the rear carrier.
Important safety guidelines for handling the battery and charger.
Steps to replace batteries in the rear light.
Procedures for replacing the front wheel and disconnecting the motor cable.
Steps for replacing the rear wheel and disconnecting the motor cable.
Information on the duration and scope of the warranty.
Conditions under which the warranty is invalidated.
BH's responsibilities and limitations regarding damages.
Details on system overcurrent errors (01, 02, 10) and their causes.
Information on TMM Sensor, Motor, and Motor sensor errors (03, 04, 05).
Explains errors related to low battery (08) and motor blockage (09).
Information on overheating (11) and protection mode (12).
Details on communication errors (13) and pedal/sensor errors (14, 15).
To Next Page
