What to do if hand control does not respond on BHM Medical Ministand Mobility Aid?
If the hand control on your BHM Medical Mobility Aid isn't responding, try the following: * Check the large red emergency stop button on the control box. * Verify the connection of the hand control cord. * Check the battery condition and replace it with a fully charged battery pack.
Why is my BHM Medical Mobility Aid actuator not responding?
If the actuator on your BHM Medical Mobility Aid is not responding, please check the following: 1. The large red emergency stop button on the control box. 2. Ensure the battery is correctly installed and fully charged; test with a new, fully charged battery pack. 3. Confirm the hand control is connected. 4. Verify the actuator is connected to the control box.
What to do if up & down buttons on control box do not respond on BHM Medical Ministand Mobility Aid?
If the up and down buttons on the control box of your BHM Medical Mobility Aid are not responding, make sure to check the large red emergency stop button on the control box and verify the battery condition. Replace with a fully charged battery pack if necessary.
General| Model | Ministand |
|---|---|
| Frame Material | Steel |
| Height Adjustment | Yes |
| Foldable | Yes |
| Wheel Type | Casters |
| Color | Gray |
Specifies the purpose and patient suitability for the Ministand lift.
Precautions to avoid electrical hazards when using the lift.
Safety measures regarding fire and explosion risks.
Guidance on brake use and emergency power cut-off procedure.
Covers lifting, lowering, sling attachment, transfers, and actuator failure.
Overview of the scheduled maintenance tasks and frequency.
Pre-transfer checklist to ensure safety and proper function.
To Next Page
