Need help?Do you have a question about the Biamp Tesira Forte and is the answer not in the manual?
Explains the perforated cover for airflow into the chassis.
Describes capacitive-touch buttons for OLED menu navigation and configuration.
Details multi-color LEDs for device and system status.
Provides information via a read-only OLED screen, including device and system status.
Describes the default device overview screen and how to navigate menus.
Displays device details, audio state, system description, and network parameters.
Covers adjustments for brightness, timeouts, dimming, and sleep modes.
Details language support for menus and error messages.
IEC connector for 100-240VAC input.
Port for configuration, IP control, and connecting to the network.
AVB or Dante RJ-45 port for audio channel connectivity.
Includes VoIP and POTS analog ports for telephone connectivity.
For receiving third-party controls or outputting command strings.
Connects to PCs for audio or firmware updates.
Mic/line level balanced input and output analog connections.
Outlines Tesira software version and minimum PC specifications.
Details required Cat5e cables for direct or switch connections.
Steps for connecting PC to the device and network using Tesira software.
Procedure for configuring IP settings on PC and Tesira device.
Covers DHCP auto-assignment and manual IP configuration.
States device compliance with FCC rules on interference.
Regulations for products with telephone interfaces and Ringer Equivalence Number (REN).
Compliance with Canadian Innovation, Science and Economic Development technical specs.
General| USB Audio | Yes |
|---|---|
| Control Ports | RS-232, GPIO |
| Sample Rate | 48 kHz |
| Power Supply | 100-240 VAC, 50-60 Hz |
| Supported Protocols | AVB, Dante, VoIP |
To Next Page