Need help?Do you have a question about the Biamp Tesira TCM-1 and is the answer not in the manual?
Describes the TCM-1 as an AVB ceiling microphone for Tesira systems.
Describes the TCM-1A as an AVB ceiling microphone and PoE+ amplifier.
Describes the TCM-1EX as an expansion ceiling microphone for TCM-1 or TCM-1A.
Facilitates connection to the Tesira AVB network for audio transmission and control.
Allows connection of additional TCM-1EX expander microphone units in a daisy-chain.
A multi-color LED indicating the status of the device.
A multi-color LED indicating the status of the amplifier.
Details the amplifier's output specifications for the TCM-1A.
Allows connection of an additional TCM-1EX expander microphone unit in a daisy-chain.
Facilitates connection to the host TCM-1 or TCM-1A unit for daisy-chaining.
Illuminates when a valid link is detected from the host TCM-1 or TCM-1A.
Multi-color LEDs providing information about the microphone status.
Defines the front of the microphone for azimuth angle in software.
Details how the amplifier channels can be configured for audio output.
Provides general guidelines and specifications for mounting the TCM devices.
Instructions for mounting the TCM above a ceiling tile.
Steps for installing the TCM directly onto a ceiling.
Instructions for mounting the TCM on a vertical surface.
Details the use of the TB-1 Tile Bridge for mounting the TCM above ceiling tiles.
Describes installing the TCM in a ceiling corner using T-bars.
Describes installing the TCM with the TB-1 tile bridge on a corner T-bar.
Mentions that various other installation configurations are possible.
Instructions for installing optional seismic cables for the TCM units.
States compliance with FCC Part 15 rules and operating conditions.
General| Brand | Biamp |
|---|---|
| Model | Tesira TCM-1 |
| Category | Microphone |
| Language | English |
To Next Page
