Bianchi VEGA 850 - Service Manual

1
VEGA
8AC=
Cod. 11086621 - ed. 01/01
PICTOGRAMS
IMPORTANT NOTICES
USER
The user is defined as the person authorized to collect drinks from the automatic distributor.
The user is not allowed to undertake any maintenance operations either ordinary or extraordinary.
In the event of a fault the user is obliged to notify the maintenance technician or the person responsible
for running the automatic distributor.
MAINTENANCE TECHNICIAN
The maintenance technician is defined as being the person responsible for filling up the containers with
soluble products, sugar, coffee, stirrers and cups.
The maintenance technician is also responsible for cleaning the distributor (see operations indicated in
chapter 9.0). In the event of a fault the maintenance technician must call the installation technician.
INSTALLATION TECHNICIAN
The installation technician is defined as the person responsible for the installation of the automatic distributor,
the starting up operations and the function settings.
Each regulation operation is the exclusive responsibility of the installation technician who also holds the
programming access password.
BEFORE USING THE MACHINE, READ THIS MANUAL CAREFULLY FOR ITS CORRECT USE IN
ACCORDANCE WITH THE CURRENT SAFETY STANDARDS.
ATTENTION: Important safety indications
READ the instruction manual machine carefully before using the machine
For any service or maintenance switch off the machine
ATTENTION: machine switched on
AUTOMATIC VENDING
INSTALLATION AND MAINTENANCE MANUAL
SAFETY SYMBOLS

Summary

Safety Symbols and Pictograms

Essential Safety Warnings

Key warnings: read manual, switch off for maintenance, machine on.

2.0 Technical Characteristics

3.0 Machine Description

4.0 Transporting the Machine

4.1 Moving and Transport

Guidelines for safely moving and transporting the vending machine.

5.0 Safety Rules

6.0 Installation

6.1 Positioning

Instructions for correctly positioning the vending machine.

6.1 Positionnement

Instructions for machine positioning near walls and leveling.

6.2 Power Supply Connection

Guide for connecting the machine to the power supply.

7.0 Programming

7.1 General Description and Preliminary Operations

Overview of programming, access codes, and keypad functions.

Keypad Functions for Programming

Explanation of keys used for increasing, decreasing, and confirming values.

9.0 Maintenance and Inactivity

9.1 Cleaning and Loading

Procedures for cleaning and loading products.

9.2 Adjustments

Procedures for adjusting machine settings.

12.0 Troubleshooting Guide

Master Card Alarms

Common alarms related to the master card and their remedies.

Vega Card Alarms

Alarms specific to VEGA cards, including memorized and non-memorized.

VEGA Specific Alarms

Alarms like Eprom error, T safety, NTC probe issues and their solutions.

3.0 General Technical Descriptions

4.0 Machine Transport and Handling

4.1 Moving and Transport Safety

Guidelines for safe manual handling and transport using trolleys.

5.0 Safety Norms

General Safety Precautions

Key safety rules including reading manual, qualified personnel, tool access.

Electrical Safety

Disconnect power before maintenance, use original parts.

Installation Environment

Suitable locations for installation (dry, temperature range, no water hoses).

Installation (Continued)

6.1 Positioning Details

Ensure ventilation, avoid inflammable objects, minimum safety distance.

6.2 Main Power Supply Connection

Guidelines for connecting to a 230V power supply, grounding, and plug accessibility.

6.3 Starting Up the Unit

Procedure for starting the machine, including safety switch operation.

6.4 Product Loading

6.4.1 Drawer Loading

Product Loading and Plate Insertion

Drawer Loading Completion

6.4.3 Payment System Installation

Coin Dispenser Installation

Steps to install the automatic coin dispenser and connect it.

Programming Mode Entry

Access Codes and Password

Details on main and sales menu codes, default password.

Navigating Programming Menus

How to navigate menus using '+' , '-' , 'digit', and 'Enter' keys.

7.2 Function Description

7.2.1 Motor Timeout

Setting the maximum motor rotation time and other motor parameters.

7.2.2 Prices

Price Setting Procedure

How to set up to 30 prices for each selection.

7.2.3 Discounts

Discount Programming

Procedure for programming up to 30 discounts.

Confirming Discount Values

How to confirm set discount values and move to the next.

7.2.4 Price Selection

Selection-to-Price Combination

Assigning selections to previously set prices.

Individual Price Selection

Programming individual prices for each selection.

7.2.5 Options

Validator and Credit Options

Settings for validator, credit timeout, and permanent credit.

MDB Coin Box and Multi-Sales Settings

Configuration for MDB coin box and multi-sales options.

Machine Number and Language

Decimal Point and Code Settings

7.2.6 Coins

Coin Programming

Programming coins to match the vending machine system.

Coin Value Verification

7.2.7 Sales

Sales Statistics Overview

Accessing and processing sales statistics (total cashed, cash, discount, overpay).

Resetting Sales Data

7.2.8 Temperature

Working Temperature Adjustment

Adjusting working temperature and defrosting parameters.

Temperature Probe Coefficients

7.2.9 Euro Conversion

Conversion Display Function

Conversion Factor and Currency

7.2.10 MDB Data

Maximum Change and Coin Engagement

7.2.11 MDB Pipe Filling

7.2.12 MDB Pipe Emptying

7.2.13 Executive Data

7.2.14 Clock

Hour;Time Set and Switch On

9.1 Cleaning Procedures

9.1.6 Maintenance Guidelines

Maintenance Precautions

9.2 Adjustments

9.2.1 Spirals Position Adjustment

9.2.2 Spiral Replacement

Adjustments (Continued)

9.2.3 Change Number of Spirals per Drawer

10.2 Machine Description (Fig.10.1)

10.5 Machine Description (Fig.10.9)

Bianchi VEGA 850 Specifications

General

Manufacturer	Bianchi
Model	VEGA 850
Category	Vending machines
Product Type	Snack and beverage vending machine
Voltage	220-240V