Need help?Do you have a question about the bianco puro and is the answer not in the manual?
Protects the motor from overheating by automatically switching off the device when temperatures rise too high.
Ensures correct mixing container placement for safe operation, preventing device activation if improperly set.
Protects the motor from damage by breaking the coupling in case of blade blockage, requiring service for replacement.
Starts selected programs and can be used to end them prematurely. It lights up green when a program is active.
Activates maximum speed operation; device stops when the button is released. Display shows '88:88' and 'H' in this mode.
Initiates a selected program by pressing the On/Off switch after choosing a program with the jog-dial.
Allows manual adjustment of speed and time settings. '+' increases values, '-' decreases them.
Enables setting the speed from level 1 to 10 (H) using dedicated buttons for adjustment.
Ensures proper mixing container placement on the motor block for the device to start operation.
Device enters this mode automatically after 1 sec display activation, with only the On/Off button lit.
Device switches to standby mode by pressing a control panel button or turning the Jog-dial.
Heats contents to nearly 100°C for 8 minutes, enabling preparation of hot soups.
Enables quick preparation of delicious sauces, for example tomato basil pesto.
Dedicated program for creating green smoothies, ensuring perfect blending of green leaves due to longer mix time.
Allows preparation of homemade soy milk. A related recipe is available on page 31.
Designed for grinding coffee beans, nuts, or grains, recommending the 2.0 liter dry container.
Ideal for preparing fruit smoothies without green leaves, and also suitable for making ice cream.
Allows variable setting of time and speed, useful when preset programs do not match recipe needs.
Enables time adjustment using TIME +/– buttons, with 5-second intervals for runtimes under 1 minute.
Allows speed setting from level 1 to 10 (H) via SPEED +/– buttons during manual mode operation.
Instructions for using the tamper through the lid opening to press contents towards the blades.
Details the process of changing the tamper's battery (CR 2032), including unscrewing and reassembly.
Information on proper disposal of used batteries at designated collection points.
Advice on cleaning the mixing container and lid, noting blade sharpness and dishwasher unsuitability.
Guidelines for cleaning the motor base using a soft, moist cloth, avoiding immersion in water or harsh chemicals.
Instructions for cleaning the tamper's display with a moist cloth, advising against running water.
To Next Page
General