Need help?Do you have a question about the BIC Muro M-50 and is the answer not in the manual?
Frequency and Power| frequency response | 36Hz - 23, 000Hz |
|---|---|
| max recommended power | 125 watts |
| sensitivity | 90dB |
Crossover and Impedance| crossover type | Second Order |
|---|---|
| impedance | 8 ohms |
Physical Characteristics| woofer size | 8" |
|---|---|
| midrange size | 2.5' |
| tweeter size | 1" |
Frequency and Power| frequency response | 60Hz - 21, 000Hz |
|---|---|
| max recommended power | 100 watts |
| sensitivity | 90dB |
Crossover and Impedance| crossover type | First Order |
|---|---|
| impedance | 8 ohms |
| required cut-out | 9-5/8" x 7" |
Physical Characteristics| woofer size | 5.5' |
|---|---|
| tweeter size | 1/2' |
| dimensions | 11'H x 7-1/2'W x 3'D |
Frequency and Power| frequency response | 50Hz - 22, 000Hz |
|---|---|
| max recommended power | 110 watts |
| sensitivity | 90dB |
Crossover and Impedance| crossover type | Second Order |
|---|---|
| impedance | 8 ohms |
| required cut-out | 10-7/8" x 7-1/2" |
Physical Characteristics| woofer size | 6" |
|---|---|
| tweeter size | 1' |
| dimensions | 12"H x 8-5/8"W x 3-1/2'D |
Frequency and Power| frequency response | 40Hz - 22, 000Hz |
|---|---|
| max recommended power | 120 watts |
| sensitivity | 90dB |
Crossover and Impedance| crossover type | First Order |
|---|---|
| impedance | 8 ohms |
| required cut-out | 12-3/4" x 5-3/4" |
Physical Characteristics| woofer size | 8" |
|---|---|
| tweeter size | 1' |
| dimensions | 14"H x 10-1/8"W x 3-3/4'D |
Frequency and Power| frequency response | 38Hz - 22, 000Hz |
|---|---|
| max recommended power | 120 watts |
| sensitivity | 90dB |
Crossover and Impedance| crossover type | Second Order |
|---|---|
| impedance | 8 ohms |
| required cut-out | 12-3/4" x 8-3/4" |
Physical Characteristics| midrange size | 2" |
|---|---|
| tweeter type | 1" swivel |
| dimensions | 14"H x 10-1/8"W x 3-3/4'D |
To Next Page
