Need help?Do you have a question about the Biedermann GmbH RollLam 140W and is the answer not in the manual?
Essential safety rules for operating the laminator to prevent injury and damage.
Instructions for assembling the stand and correctly unpacking the laminator.
Steps for installing the supply shaft holders on the laminator.
Guidance for connecting the laminator to the electrical network safely.
Detailed technical data and feature comparison for RollLam 120W, 140W, and 160W models.
Identification of all parts and controls visible on the front of the laminator.
Identification of components located on the rear side of the laminator.
Explanation of the control panel buttons, lamps, and temperature/speed regulators.
Guidance on how to properly adjust the pressure between the laminator rollers.
Instructions for adjusting the brakes on the supply shafts for optimal film tension.
Explains the function of quick gripping cones for film positioning and tension.
Procedure for coating substrates using double-sided adhesive film.
Steps for mounting pictures onto substrates already coated with adhesive.
Method for precisely mounting large pictures onto pre-coated substrates.
Procedure for laminating using working boards as support.
Method for laminating directly from a film roll using working boards.
Procedure for laminating using silicone release paper for film guidance.
Instructions for laminating when the picture is as wide as the film.
Process for laminating and applying double-sided adhesive in one step.
Procedure for laminating a picture from both the front and back sides.
Method for laminating entire rolls of pictures or self-adhesive vinyl films.
Description of the media holder's role in facilitating picture handling.
Information on using additional supply shafts for different film widths.
Solutions for common issues like 'waves' in the picture during lamination.
Methods to fix wrinkles occurring in the adhesive or laminating film.
Troubleshooting steps for wrinkles appearing during the lamination process.
Solutions for wrinkles that appear when working in a 'from-roll-to-roll' manner.
Tips to prevent the picture from rolling up heavily after lamination.
Advice on feeding the picture correctly to avoid crooked results.
Answers the question about whether mounting and laminating can be done in a single step.
Discusses the recommended order for mounting and laminating pictures.
Provides methods and recommendations for cleaning the laminator rollers.
General| Brand | Biedermann GmbH |
|---|---|
| Model | RollLam 140W |
| Category | Laminator |
| Language | English |
To Next Page