27
ASSE NELLA MANICA and JOLLY IRONING BOARD
ENGLISH
ended the usage, turn o the switches and unplug the machi-
ne.
13. Connect the machine to an electric outlet compable with the
plug included, checking its integrity. Only if necessary, use only
CE branded plugs/extension cables in compliance with europe-
an norms and/or properly set and with a grounding system.
14. Any type of maintenance and/or cleaning must be performed
with the machine o, cooled and unplugged.
15. Use only original spare parts and accessories.
16. Installaon, maintenance and repairing operaons must be
performed solely by qualied personnel authorized by the ma-
nifacturer.
17. Before connecng the appliance verify that the line voltage
matches with the data wrien on the label on the back; if you
are not sure of your line voltage, contact qualied personnel.
18. The electrical system to which the appliance will be connected
must be wired and supplied with a residual current device (life-
line wiring) and an earthed conductor lead, mandated by law.
Make sure of these security basic requirements, and if in doubt,
contact a qualied technician. The manufacturer is not respon-
sible for eventual damages to persons and/or things caused by
absence or malfuncon of the residual current device or the
earthed conductor lead.
19. Safe funconing is guaranteed only when the appliance is con-
nected to the public power grid with a 3 poles plug (no xed
connecon). Once connected, the plug must be accessible so it
can be unplugged in case of need.
20. To avoid damages, the connecon data on the machine plate
(protecon, frequency, voltage) must match with the ones of
the power grid to which the machine will be connected. In case
of doubt apply to a qualied technician.
21. When showing even small signs of damage, replace the power
To Next Page
Loading...