After opening the packing ensure that the machine is intact
and check that all of the main parts are included.
Plastic bags, polystyrene, nails etc. are potential sources of
danger, therefore they must not be left unattended or
within the reach of children.
The machine must be positioned on a flat, solid and stable
surface, away from heat sources. Ensure a free space at the
sides and at the back of the machine of at least 20 cm.
There must be sufficient free space to allow the operator to
have access to the machine in the event of malfunctions.
Choose a hygienic and well-lit room with an easy-to-
access power outlet.
Check that the supply voltage of the machine is
the same as that of the electricity network to
which it will be connected.
The electrical outlet to which the machine will be
connected must comply with the plug of the
machine, sized to comply with the data on the
rating plate of the machine, connected to an
efficient earthing system.
Check that the power cord is not damaged or
defective. If there is a problem, do not use the
machine under any circumstances. The power
To Next Page
Loading...
