cord must be replaced by the manufacturer or its
service center.
- Pay attention to the placing of the cable during
installation, which must not:
- Be a hindrance to people or property
- Be pinched or compressed
- Be forcibly bent
- Come close to hot surfaces
- Be immersed, and / or placed near water or other
liquids
- Come into contact with any type of liquid
- Be crushed or lean against sharp surfaces
- Be wrapped in coil when the machine is in operation
- Be tampered
RISKS
- It is important to ensure that no child can act on
the device!
- The device can be dangerous for children, it must
be inaccessible to them. If not used, or if left
unattended, disable it.
- Do not leave the materials used to pack the
appliance within reach of children.
- Do not insert objects through the openings in the
appliance (Electrical hazard!).
To Next Page
Loading...
