Why does juice spray from the Bifinett KH 451 outlet?
If the Bifinett Juicer sprays juice from the outlet, it might be due to several reasons. You may be working too fast, so try working a little slower. Avoid pressing too hard with the stodger when adding more product. Ensure you've selected speed setting I on the On/Off switch. Also, the filter or juice outlet might be blocked, so clean them thoroughly.
How to fix a Bifinett KH 451 that does not function?
If the Bifinett Juicer appliance does not function, ensure that it is properly connected to a power socket. Check that the appliance is switched on using the On/Off switch. Also, verify that the clasps are securely fastened.
What to do if juice wells out of my Bifinett KH 451 Juicer?
If juice wells out between the edge of the housing lid and the juice container of your Bifinett Juicer, you might be working too fast, try to work a little slower. Also, the filter or the juice outlet could be blocked, so clean the filter and the juice container. Make sure that speed setting I is selected on the On/Off switch.
Why is the vegetable mash moist in my Bifinett Juicer?
If the vegetable mash is moist and you obtain too little juice from your Bifinett Juicer, it may be because you are working too fast; try working a little slower. The filter might also be blocked, so clean the filter.
What to do if my Bifinett Juicer motor is still?
If the motor of your Bifinett Juicer stays still while juicing, or if it turns noticeably slow or irregularly, the filter might be blocked. Immediately switch off the appliance and disconnect the power plug. Eliminate the blockage.
Explains the Continuous Operation (CO) time for the appliance to prevent motor overheating.
Instructions to prevent electrical shocks, including checking voltage and cable condition.
Covers general safety during use, including preventing fires, injuries, and proper appliance assembly.
Using a lightly moistened cloth for the housing and power cable.
Washing stodger, lid, and pulp container in soapy water or dishwasher.
Using the supplied nylon brush and running water for cleaning the filter.
To Next Page
General