Big Red Rooster BRRC105

To Next Page

Sleep Training Alarm Clock

Model # BRRC105

An instruction video is available at the link below

or search “BRRC105 Instruction Video” on Youtube.

www.londonjohnson.com/pages/BRRC105

HOW TO SET THE CLOCK

TIME SET: Hold TIME SET button for 2 seconds. The word SET will

flash on the screen. Release TIME SET button. Adjust hours/minutes.

Press TIME SET to lock time.

ALARM 1 SET and ALARM 2 SET: Hold ALARM SET button for

2 seconds. The word SET and the corresponding bell will flash on

the screen. Release ALARM SET button. Adjust hours/minutes.

Press the same ALARM SET button to lock the alarm time.

ALARM TIME REVIEW: To check the alarm time press and release

ALARM SET button. The alarm time, the word REVIEW and the

corresponding bell will appear on the screen for 3 seconds.

ALARM 1 ON/OFF and ALARM 2 ON/OFF: Press to turn alarm

ON/OFF. The ball will turn red and the corresponding bell will show

on the screen when alarm is active. There are 2 alarms to save

2 different wake up times. Only 1 alarm can be active at a time.

The alarm must be turned on each night.

NAP TIMER: Hold NAP TIMER button for 2 seconds. The words SET

and NAP ON will flash on the screen. Release NAP TIMER button.

Adjust hours/minutes. The nap timer can be set for 1 minute to

12 hours. Press NAP TIMER button to lock time and begin the count

down. Press NAP TIMER button for 1 second to turn the nap timer

ON or OFF. The ball will turn red, the count down time and the words

NAP ON will show on the screen when the nap timer is active.

BUZZER ON/OFF: Press to turn buzzer ON/OFF. When OFF there

will be no buzzer sound at the alarm time or at the end of nap timer

count down. Only the ball will change from red to green at the alarm

time and at the end of nap timer count down. If the words BUZZER

ON show on the screen the buzzer sound is active. If you do not see

the words BUZZER ON on the screen the buzzer sound is inactive.

BRIGHTNESS: Press to change brightness: 0% (OFF), 25%, 50%,

75%, 100%. The word BRIGHTNESS will flash on the screen.

The brightness setting will lock after 5 seconds.

GREEN LIGHT DURATION: Press to change green light duration:

0:15, 0:30, 1:00, 1:30, 2:00. The word DURATION will flash on the

screen. The green light duration setting will lock after 5 seconds.

RESET: If your alarm clock is malfunctioning use a paper clip to press

the RESET button. This will reset the clock to the default settings.

BACK LIGHT: Press to turn the LCD screen back light on for

10 seconds.

BUZZER & GREEN LIGHT OFF: Press to turn the buzzing sound or

green light off (how kids turn off the alarm). This button will not

deactivate the alarm prior to the wake up time. Use the buttons in the

parent compartment to turn off the alarm or nap timer prior to the wake

up time.

PARENT CONTROLS

BALL GLOWS RED OR GREEN

RED – TIME TO SLEEP

GREEN – TIME TO WAKE

LCD SCREEN

CHILD CONTROLS

Need help?

Do you have a question about the Big Red Rooster BRRC105 and is the answer not in the manual?

Summary

Setting the Sleep Training Clock

Set Clock Time

Hold TIME SET for 2s, adjust hours/minutes, press TIME SET to lock time.

Set Alarm Times

Hold ALARM SET for 2s, adjust hours/minutes, press to lock alarm time.

Review Alarm Time

Press ALARM SET to view alarm time, REVIEW, and bell for 3 seconds.

Alarm On;Off Control

Press ALARM ON/OFF. Ball turns red, bell shows when alarm is active.

Buzzer and Brightness Settings

Control buzzer sound and adjust screen brightness from 0-100%.

Green Light Duration

Press DURATION to set green light duration from 0:15 to 2:00.

Reset Function

Use paper clip on RESET button to restore clock to default settings.

Child Controls and Features

Nap Timer Operation

Hold NAP TIMER for 2s, adjust hours/minutes, press to lock/start countdown.

Backlight and Alarm Off

Turn LCD backlight on for 10s or press BUZZER & GREEN LIGHT OFF.

Power and Battery Information

AC Adaptor Power Cord

Plug AC adaptor into outlet. Use only provided adaptor; not suitable for children under 36 months.

Battery Installation

Use Phillips #2 screwdriver to remove cover, insert 3 NEW AA alkaline batteries.

Battery Precautions

Use specified battery type, follow polarity, do not mix battery types, clean contacts.

Regulatory and Warranty Information

FCC Statement

Device complies with Part 15 FCC Rules for digital devices.

One-Year Limited Warranty

Product is warranted free from defects for one year from date of purchase.

The Big Red Rooster Sleep Training Alarm Clock, Model # BRRC105, is designed to help children learn sleep and wake-up routines. It features a friendly rooster design and utilizes color cues (red for sleep, green for wake) in addition to traditional alarm functions. The clock includes both parent and child controls to manage its various features.

Function Description

The primary function of the BRRC105 is to provide a visual indicator for sleep and wake times. The clock's ball glows red when it's time to sleep and green when it's time to wake up. This visual cue is particularly helpful for young children who may not yet be able to tell time. In addition to the visual cues, the clock can also sound an audible buzzer alarm.

The device includes two independent alarms (Alarm 1 and Alarm 2) that can be set for different wake-up times. Only one alarm can be active at a time, and it must be turned on each night. The clock also features a nap timer, which can be set for durations ranging from 1 minute to 12 hours. When the nap timer is active, the ball glows red, and a countdown is displayed.

The clock's LCD screen displays the current time, alarm times, nap timer countdown, and various settings such as buzzer status, brightness, and green light duration. The screen also provides visual feedback during the setting process, indicating when a setting is active or being adjusted.

Usage Features

Parent Controls:

The parent controls are located on the back of the clock and allow for comprehensive management of the device's settings.

Time Set: To set the current time, hold the "TIME SET" button for 2 seconds. The word "SET" will flash on the screen. Release the button, adjust the hours and minutes using the appropriate buttons, and then press "TIME SET" again to lock the time.
Alarm Set (Alarm 1 & Alarm 2): To set an alarm, hold the "ALARM SET" button for 2 seconds. The word "SET" and a bell icon will flash. Release the button, adjust the hours and minutes, and press "ALARM SET" again to lock the alarm time. To review an alarm time, simply press and release the "ALARM SET" button. The alarm time, "REVIEW," and a bell icon will appear for 3 seconds.
Alarm On/Off (Alarm 1 & Alarm 2): Press the "ALARM ON/OFF" button to activate or deactivate an alarm. When an alarm is active, the ball will glow red, and a bell icon will appear on the screen.
Nap Timer: To set the nap timer, hold the "NAP TIMER" button for 2 seconds. "SET" and "NAP ON" will flash. Release the button, adjust the hours and minutes, and press "NAP TIMER" again to lock the time and start the countdown. To turn the nap timer on or off, press the "NAP TIMER" button for 1 second. When active, the ball glows red, the countdown time is displayed, and "NAP ON" appears on the screen.
Buzzer On/Off: Press the "BUZZER ON/OFF" button to toggle the audible alarm sound. When the buzzer is off, only the ball will change color at the alarm time or at the end of the nap timer countdown. "BUZZER ON" will be displayed on the screen when the buzzer is active.
Brightness: Press the "BRIGHTNESS" button to cycle through different brightness levels: 0% (OFF), 25%, 50%, 75%, and 100%. "BRIGHTNESS" will flash on the screen, and the setting will lock after 5 seconds.
Green Light Duration: Press the "GREEN LIGHT DURATION" button to select how long the green "wake-up" light stays on: 0:15, 0:30, 1:00, 1:30, or 2:00. "DURATION" will flash on the screen, and the setting will lock after 5 seconds.
Reset: In case of malfunction, a "RESET" button is available. Use a paper clip to press this button to restore the clock to its default settings.

Child Controls:

The child controls are located on the front of the clock, designed for easy interaction by children.

Back Light: Pressing the "BACK LIGHT" button turns on the LCD screen backlight for 10 seconds, allowing children to check the time in the dark.
Buzzer & Green Light Off: This button allows children to turn off the buzzing sound or the green light. It's important to note that this button does not deactivate the alarm prior to the wake-up time; it only silences the sound or turns off the light once the alarm has triggered. Parents must use the parent compartment buttons to turn off alarms or nap timers before they trigger.

Power Source:

The clock can be powered by an AC adaptor or three AA batteries. When both are connected, the clock prioritizes power from the adaptor. If power is lost from the adaptor while batteries are installed, the clock will continue to operate on battery power.

Maintenance Features

Battery Installation/Replacement: To install or replace batteries, remove the battery compartment cover using a Phillips #2 screwdriver. Insert three new AA alkaline batteries, ensuring correct polarity as indicated in the compartment. Replace the cover and tighten the screw.
Battery Precautions:
- Use only the specified size and type of batteries.
- Always purchase the correct size and grade of battery.
- Ensure correct polarity during installation to prevent device damage.
- Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium) batteries.
- Replace all batteries of a set at the same time; do not mix old and new batteries.
- Clean battery contacts and device contacts prior to installation.
- Do not dispose of batteries in fire.
- Remove batteries if the product will not be used for an extended period.
Cleaning: The manual does not specify cleaning instructions, but general electronic device care suggests wiping with a dry, soft cloth.
Troubleshooting: If the alarm clock malfunctions, the "RESET" button can be used to restore default settings. For issues related to radio or television interference, the manual suggests reorienting the receiving antenna, increasing separation between equipment and receiver, connecting equipment to a different circuit outlet, or consulting a technician.