BIG TIME TOYS The Original Roller Racer Flying Turtle User Manual

A unique product of American
ingenuity—This timeless toy
delights another generation!
How’s It Go?
1. Sit on the middle of the seat.
2. Place feet on the handlebars.
3. Grip the handlebars.
4. Swing the handlebars from side to side
(don’t just turn them—swing!!)
Safety Instructions
The Roller Racer
®
is a safe toy for children
following these guidelines.
1. Do not use on or near inclines, roadways,
bodies of water or stairs.
2. Always ride seated with feet on the
handlebars.
3. Wear shoes and a helmet.
4. Allow only one rider at a time.
5. Weight limit is 150 lbs.
The Roller Racer® has a One Year Limited Warranty. This product is designed
for home-use only. Usage in institutional or commercial settings voids warranty.
Replacement parts are available.Contact Big Time Toys to order. As per our
discretion, we will replace the defective part or the entire unit. This warranty does
not cover damages resulting from misuse of product.
Big Time Toys, LLC.
2823 Dogwood Place, Nashville, TN 37204
Toll Free 800-419-3810
www.bigtimetoys.com
Interested in ordering in bulk? Send an e-mail to info@bigtimetoys.com to learn more about placing wholesale orders. ©2020 Big Time Toys, LLC, All Rights Reserved
We are happy that you are happy. If you
don’t know how to express your happiness,
we’ve got a few recommendations...
Our friendly supportive service will work
hard to put a smile back on your face.
Here’s how we can connect:
Share your happy
experience with
an online review.
Email us at:
info@bigtimetoys.com
Happy?
Not Happy?

BIG TIME TOYS The Original Roller Racer Flying Turtle Specifications

General

Brand	BIG TIME TOYS
Model	The Original Roller Racer Flying Turtle
Category	Toy
Language	English

Summary

How's It Go?

Safety Instructions

Customer Feedback and Support

Expressing Happiness

Recommendations for sharing happiness, such as writing an online review.

Resolving Dissatisfaction

How to contact customer service for assistance and to resolve issues.

Easy Assembly Instructions

Tools Needed

List of tools required for assembly, including specific wrench sizes.

Step One: Remove Lock Nut

Instruction to remove the Post Lock Nut from the Post Bolt.

Step Two: Insert Post Bearings

Instruction to gently tap Post Bearings into the front of the seat.

Step Three: Attach Handlebars

Instruction to slide handlebars over the Post Bolt into the seat.

Step Four: Tighten Post Lock Nut

Instruction to attach and tighten the Post Lock Nut using wrenches.

Step Five: Apply Stickers

Instruction to carefully apply the three stickers to the rear and sides of the seat.