深圳市必趣科技有限公司
BIG TREE TECH
六、Parameters
OLED menu:
Home -- Home page
Sensor -- Sensor Information
Calibration -- Enter Press and confirm calibration
BaudRate -- UART baud rate selection
9600 19200 115200 256000
Current -- 4 level current
very high high medium low
Micro Step -- set subdivision
1 2 4 8 16 32 64 128 256
Direction -- Set Step mode direction
Inverted Normal
Enable Pin -- Set Step mode enable
Inverted Normal
Save Setting -- Saves the setting to Flash
About -- Version information
To Next Page
Loading...
