BIG HSK-A63 - User Manual

ANGLE HEAD
OPERATION MANUAL
INDEX
Read the operation manual before use.
Bedienungsanleitung vor Gebrauch lesen.
P 1
P 2
P 4
P 9
P 9
P 10
P 10
P 11
P 13
P 13
P 14
P 14
CAUTION
MOUNTING OF ANGLE HEAD
STOP BLOCK
LOCATING PIN
FINAL CHECK FOR AUTOMATIC TOOL CHANGE
HOW TO OPERATE
ADJUSTING THE ORIENTATION DEGREE AND
CUTTER HEAD DIRECTION
MOUNT OF THE CUTTING TOOL
OTHERS
COOLANT FEED TO THE CUTTING EDGE
MAINTENANCE
OTHER CAUTIONS
P 15
P 15
P 17
P 18
P 19
P 21
P 21
P 22
P 22
AG90 SERIES
(
Spindle Angle : 90°
)
NEW BABY CHUCK TYPE
BUILD UP TYPE
MILLING CHUCK TYPE
TAPPER TYPE
AG45 SERIES
(
Spindle Angle : 45°
)
NEW BABY CHUCK TYPE
AGU SERIES
(
Spindle Angle : 0°-90°
)
UNIVERSAL TYPE
CAUTION
ACHTUNG
Regarding the “Face mill type” and “Adjustable small head type”
please refer exclusive operation manual.
Für „Planfräsertyp“ und „Einstellbarer Bolzentyp“ bitte separate
Bedienungsanleitung lesen.
SPECIFICATIONS
P 1
P 2
P 4
P 9
P 9
P 10
P 10
P 11
P 13
P 13
P 14
P 14
SICHERHEITSHINWEIS
WINKELKOPF MONTIEREN
STOPPBLOCK
POSITIONIERUNGSSTIFT
AUTOMATISCHER WERKZEUGWECHSEL ENDKONTROLLE
BEDIENUNGANWEISUNG
EINSTELLUNG DES WINKELS UND
SCHNEIDKOPFAUSRICHTUNG
INSTALLATION SCHNEIDWERKZEUG
SONSTIGES
KÜHLMITTELZUFÜHRUNG ZUR SCHNEIDKANTE
INSTANDHALTUNG
ANDERE WARNHINWEISE
P 15
P 15
P 17
P 18
P 19
P 21
P 21
P 22
P 22
AG90-SERIE
(
Spindelwinkel: 90º
)
NEW BABY CHUCK TYP
BUILD UP TYP
MILLING CHUCK TYP
TAPPER TYP
AG45-SERIE
(
Spindelwinkel: 45º
)
NEW BABY CHUCK TYP
AGU-SERIE
(
Spindelwinkel: 0º-90º
)
UNIVERSAL TYP
Technische Einzelheiten
WINKELKOPF
BEDIENUNGSANLEITUNG

Summary

SAFETY AND CAUTION INDICATOR

GENERAL SAFETY WARNINGS

Safety and caution indicator used in the manual.

INSTALLATION AND OPERATING INSTRUCTIONS

ASSEMBLY OF THE CUTTING TOOL

Procedures for assembling cutting tools into the angle head.

DURING OPERATION SAFETY

Safety guidelines during machining operations.

OTHER OPERATING POINTS

Additional points regarding use and maintenance.

MOUNTING OF ANGLE HEAD FOR ATC

MECHANISM FOR ATC LOADING

Details on the ATC mechanism for loading the angle head.

MECHANISM FOR DISMOUNTING AND TERMINOLOGY

MECHANISM FOR DISMOUNTING HOLDERS

Explanation of the mechanism for dismounting holders.

EXPLANATION OF TERMS

Definitions of key terms used in the manual.

STOP BLOCK PREPARATION AND DIMENSIONS

MODEL SBH DIMENSIONS

Dimensional information for SBH model stop blocks.

MODEL SBA DIMENSIONS

Dimensional information for SBA model stop blocks.

STOP BLOCK MODELS AND SELECTION

MODEL SB-A;SB-B DIMENSIONS

Detailed dimensions for SB-A/SB-B stop blocks.

MODEL SB-F DIMENSIONS

Detailed dimensions for SB-F stop blocks.

MODEL SB-G DIMENSIONS

Detailed dimensions for SB-G stop blocks.

MODEL SB-E DIMENSIONS

Detailed dimensions for SB-E stop blocks.

DETERMINING STOP BLOCK HEIGHT

How to determine the stop block height.

STOP BLOCK DIMENSIONS IN INCHES

MODEL SB-A; SB-B DIMENSIONS (INCH)

Inch dimensions for SB-A/SB-B stop blocks.

MODEL SB-G DIMENSIONS (INCH)

Inch dimensions for SB-G stop blocks.

MODEL SB-F DIMENSIONS (INCH)

Inch dimensions for SB-F stop blocks.

MODEL SB-E DIMENSIONS (INCH)

Inch dimensions for SB-E stop blocks.

DETERMINING STOP BLOCK HEIGHT (INCH)

Determining stop block height in inches.

CHECKING POSITION OF THE STOP BLOCK

CHECKING FOR CLEARANCE

Ensuring clearance for automatic tool change.

MISCELLANEOUS NOTES AND STOP BLOCK MOUNTING

OTHERS

Miscellaneous notes and considerations.

MOUNTING THE STOP BLOCK

Step-by-step guide for mounting the stop block.

LOCATING PIN AND FINAL ATC CHECK

LENGTH OF LOCATING PIN

Information on the length of the locating pin.

FINAL CHECK FOR AUTOMATIC TOOL CHANGE

Performing final checks for ATC compatibility.

OPERATING INSTRUCTIONS

ADJUSTING ORIENTATION DEGREE AND CUTTER HEAD DIRECTION

How to set the orientation degree and cutter head.

ADJUSTING CUTTER HEAD THROUGH 360°

ADJUSTING CUTTER HEAD THROUGH 360°

Procedure for 360-degree cutter head adjustment.

SUPPORT PIN FUNCTION AND HANDLING

SUPPORT PIN FUNCTION AND REMOVAL

Details on the support pin's function and removal.

COOLANT FEED AND GENERAL NOTES

COOLANT FEED TO THE CUTTING EDGE

How coolant is delivered to the cutting edge.

GENERAL NOTES FOR ALL SERIES

Notes on coolant and rust prevention for all series.

MAINTENANCE AND OPERATIONAL CAUTIONS

MAINTENANCE

Guidelines for maintenance and lubrication.

OTHER CAUTIONS

Additional warnings and precautions for operation.

AG90-SERIES SPECIFICATIONS

NEW BABY CHUCK TYPE SPECIFICATIONS

Technical specifications for AG90 series new baby chuck type.

BBT50;HSK-A100 SPECIFICATIONS

BBT50;HSK-A100 SHANK SPECIFICATIONS

Technical specifications for BBT50/HSK-A100 shank models.

MOUNT OF THE CUTTING TOOL

Procedure for mounting cutting tools.

HMC32 MILLING CHUCK TYPE SPECIFICATIONS

MOUNT OF THE CUTTING TOOL

Procedure for mounting cutting tools.

USE WITH REDUCTION SLEEVE

Guidelines for using reduction sleeves.

TAPPER TYPE SPECIFICATIONS

MOUNT OF THE TAP HOLDER

Procedures for mounting tap holders.

TAPPING INSTRUCTIONS

INSTRUCTIONS FOR THROUGH HOLE TAPPING

Instructions for through hole tapping operations.

INSTRUCTIONS FOR BLIND HOLE TAPPING

Instructions for blind hole tapping operations.

AG45-SERIES SPECIFICATIONS

MOUNT OF THE CUTTING TOOL

Procedure for mounting cutting tools.

AGU-SERIES SPECIFICATIONS

MOUNT OF THE CUTTING TOOL

Procedure for mounting cutting tools.

ADJUSTING THE SPINDLE ANGLE

ADJUSTING THE SPINDLE ANGLE

Procedure for adjusting the spindle angle.

ORIENTATION AND CUTTER HEAD DIRECTION ADJUSTMENT

ATTACHING THE CHIP GUARD (0°-45° ANGLES)

How to attach chip guards for 0°-45° angles.

CHIP GUARD ATTACHMENT (45°-90° ANGLES)

ATTACHING THE CHIP GUARD (45°-90° ANGLES)

How to attach chip guards for 45°-90° angles.

BIG HSK-A63 Specifications

General

Brand	BIG
Model	HSK-A63
Category	Industrial Equipment
Language	English