•
Use remote control keys to select function.(Clock mode, alarm setting, rotating display mode, temperature
setting).
1-702 726-9030
info@bigtimeclocks.biz
www.bigtimeclocks.biz
•
PRESS CLOCK in any display to show time.
•
PRESS Display to show date, time and temperature in a rotating sequence.
•
Press MUTE to turn the remote control key tone “on” or “off”. If there is a beep, sound is turned on.If there is
no sound, sound is muted.
•
PRESS to set alarms. The first two digits will flash. You can set up to 16 alarms.
•
Enter the alarm group to be set (1 to 16), then press to save data.
•
PRESS, the start/stop button to activate or turn off an alarm (if “off” the display will show “- -”)
•
PRESS again to enter the alarm time setting. PRESS to switch from hours to minutes and once
more to save data.
•
PRESS Start/Stop to select the alarm buzzing duration: 15s,30s or 60s. The alarm will then self-shut.
•
PRESS once more to exit and save your settings.
•
PRESS Start/Stop ғto select a rotating display mode (time, date, temperature) or a fixed time display mode.
•
PRESS in clock display mode to set year, press once more to set the date and once more to set the
time
•
PRESS once more to exit and save your settings.
To Next Page
Need help?
General