INDEX
1
Safety Warnings
2
Specification
3
4
Using Instructions
5
Cleaning and Maintenance
6
Environmental Protection
The following are the icons that are used for the tool. Make sure you
fully understand them before using them.
Symbols
!
Read before use
CE mark
Caution
Conforms to WEEE
Wear safety glasses
Wear hearing protectors
Wear safety gloves
Warranty
1. Safety Warnings
Please keep the workplace clean and bright;
Please keep the grinder away from the high temperature source, and flammable, explosive, corrosive liquids and gases;
Please protect the grinder from damage by external force or sharp objects, and pay attention to prevent falling damage;
Please don’t touch the cup wheel by hand during working, and prevent the wire from getting into the cup wheel ;
Please don’t keep the grinder exposed to rain and humidity for a long time;
When using the grinder, please wear dust masks and goggles；
Please keep the cup wheel sharp and clean and replace them in time;
Please keep the cup wheel clean and working freely, and keep the track clean and sliding freely.
Please put idle grinder outside the reach of children, and don't let someone unfamiliar with the grinder or who doesn't know the
instructions operate the grinder.
Please send your grinder to professional maintenance personnel,and must use the same spare parts for replacement;
Please keep the handles clean, dry and oil-free.
Usage Instructions
English
4 www.bihuitools.com
2. Specification
Model CG1900
Measurement 384mm×227mm×307mm
Net Weight 6.6Kg
Power 1900W
Voltage/Frequency 230V/50-60HZ
Speed 0-3000r/min
Manufacturer reserves the right to change specifications without notice.
Specifications may differ from country to country
Suitable for use on concrete, etching, tile adhesive, natural stone, plaster, paint, coating and adhesive carpet.
Please allow a 15-minute coling period when the device's overload relay cuts operation to prevent overheating
To Next Page
Loading...