Need help?Do you have a question about the Bikecomm SALUT and is the answer not in the manual?
Controls music playback, redialing last number, and voice dialing.
Manages intercom selection and volume/track control.
Controls track selection and volume adjustment.
Explains how to charge using a USB cable and LED status lights.
Describes the audible notification for a low battery state.
Steps to turn the headset on, indicated by a blue LED.
Steps to turn the headset off, indicated by a red LED and voice notification.
Instructions for connecting the SALUT headset to a Bluetooth phone.
How to answer, end, reject calls and use voice dial.
Operating music playback, track selection, and volume adjustments.
Handling multiple calls and configuring automatic answer mode.
Steps to pair headsets for group or 1-on-1 communication.
Overview of manual and VOX modes for direct intercom.
How to configure voice activation levels and manual mode settings.
Steps to assign member numbers and pair headsets for group intercom.
How to initiate group intercom and leave the session.
To Next Page
General