Biketronics BT 355 - User Manual

To Next Page

1) Connect RCA connectors to amplifier

2) Connect RCA cables to BT 355 Line Leveler

3) Connect speaker wires to BT 355

“HPF” dials control High Pass Filter left and right

The dials on the ends adjust gain levels left and right

Default

HPF

Installation Guide

BT 355 Line Leveler

High Pass Filter (HPF)

Increase Gain

Gain Control

Increase Filter Frequency

www.biketronics.com Lifetime Warranty 1-800-735-2419

Need help?

Do you have a question about the Biketronics BT 355 and is the answer not in the manual?

Summary

Details on the High Pass Filter dials that control frequency for audio channels.

Explains how the dials on the ends adjust audio gain levels for left and right channels.

Guide for using stock front speaker plugs to obtain signal for the line leveler.

Instructions for enabling rear outputs, requiring a flash for fader controls.

Wiring configuration for Ultra models utilizing a break-out harness.

Details on connecting the line leveler for universal audio system applications.

General