BILLFET JLT-9025D User Manual

User Manual
3.2inch LCD Digital Wireless Baby Monitor
Model：JLT-9025D
1. charge/discharge:
RX: when the RX connected to external DC power supply, power supply for
the battery.Charging indicator LED normally on (if the boot, you can see
the LCD display battery in the top right corner symbols are charging).When
the battery charging LED out, battery showed full;When the RX battery
power supply, the upper right corner of the LCD display the current battery
capacity.When low battery LCD displays low bat, speakers, there will be
a prompt power indicator LED will flash.Press any key when low electricity
will exit when time report to the police.Alarm again after 3 min.When the
battery voltage to shutdown a tipping point, the machine automatically
enter the shutdown state.
TX: when TX connected to external DC power supply, power supply for the
battery.Charging indicator LED normally on, when the battery charging LED
out;When using battery power and achieve low power, low power indicator
LED will flash, when low electricity shutdown point is reached, TX will
automatically power off.
2. Turn on/off:
TX: off 3 s long switch, the machine turned on, the power LED display for
the green.3 s on long press switch to turn it off, the power LED will
extinguish.
RX: off 3 s long switch, power LED display for the green, the machine open,
LCD display images;3 s on long press switch, the machine shutdown.
3、The code/cancellation of code:
 how to code the operation details are as follows:
TX: on light press press pair, the signal light flashing, into a state
machine to code.
RX: on light press press pair, matching channel displayed on the LCD,
press on, under the direction key, select the channel according to
the pair, LCD display "pairing......"After, when the RX and TX on code,
LCD screen pop up "pairing succeed, CH2 is selected press OK button
to back Menu" time to confirm the code.If the machine within 20 s were
not as TX, deserve to go up to the LCD display on "waiting for
Connecting..."The machine state of the code will exit, back to the
current interface.
 h
ow to cancel the yard operation details are as follows:
RX: on light press press pair, matching channel displayed on the LCD,
press the left and right direction key, press Del channel selection,
can eliminate the code information.

BILLFET JLT-9025D Specifications

General

Brand	BILLFET
Model	JLT-9025D
Category	Baby Monitor
Language	English

Summary

Charge and Discharge

RX Unit Charging and Battery

Details RX connection to power, charging indicator, and battery level display status.

TX Unit Charging and Battery

Details TX connection to power, charging indicator, and low power alerts.

Turn On and Off

TX Unit Power On/Off

Procedure for turning the TX unit on/off using a 3-second press and LED indication.

RX Unit Power On/Off

Procedure for turning the RX unit on/off using a 3-second press and display status.

Code Pairing and Cancellation

Pairing the Monitor Units

Step-by-step guide for pairing TX and RX units, including confirmation messages.

Cancelling Code Pairing

Instructions for cancelling code pairing information on the RX unit using navigation keys.

Simple Instructions Overview

Main Function Descriptions

FCC Caution and Compliance