3
SPECIFICATIONS
Motor 120V, 60 Hz, 6.2A
Speeds 350-3,000 r/min. (RPM)
Swing 10"
Table Size 7-5/8 in. x 6-1/2 in.
Total Height 29"
INTRODUCTION
Thanks for purchasing the Drill Press. We know you are excited to put your tool to work, but first, please take
a moment to read through the manual. Safe operation of this tool requires that you read and understand this
operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety
concerns, as well as helpful assembly and operating instructions for your tool.
NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.
reserves the right to change this product and specifications at any time without prior notice.
Keep this manual available to all users during the entire life of the tool and review it frequently to maximize
safety for both yourself and others.
SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. The safety symbols and the explanations
with them deserve your careful attention and understanding. Always follow the safety precautions to reduce the
risk of fire, electric shock or personal injury. However, please note that these instructions and warnings are not
substitutes for proper accident prevention measures.
To Next Page
