Bilt Member's Mark GR2334401-MM-00

Need help?

Do you have a question about the Bilt Member's Mark GR2334401-MM-00 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features
Warranty Information

This document is an assembly, user, and maintenance manual for a Member's Mark 4 Burner Gas Grill.

Function Description:

The Member's Mark 4 Burner Gas Grill is an outdoor cooking appliance designed for household use. It features four main burners and one side burner, providing versatile cooking options. The grill is designed to operate with a 20 lb. (9.1kg) LP (liquid propane) cylinder equipped with a Type 1 cylinder valve and an overfilling protection device (OPD). The appliance is intended for outdoor use only and should not be operated in enclosed areas or on boats/recreational vehicles.

Important Technical Specifications:

Model Numbers: GR2334401-MM-00 / GR2334404-MM-00
Input Rating:
- Main burner: 4 x 12,000 BTU/HR
- Side burner: 1 x 12,000 BTU/HR
LP Cylinder Requirements:
- Capacity: 20 lb. (9.1kg) maximum
- Dimensions: 12” (30.5cm) diameter x 18" (45.7cm) tall
- Valve Type: Type 1 cylinder valve with an overfilling protection device (OPD)
- Construction: Must conform to U.S. Department of Transportation (D.O.T.) or National Standard of Canada CAN/CSA B339 specifications.
Clearance Requirements: A minimum clearance of 60 inches (152.4 cm) from all sides of the grill, deck railings, walls, or other combustible material.
Product Dimensions: 55.51" x 25.05" x 48.96" (141.0cm x 63.6cm x 124.4cm)
Product Weight Capacity: Supports up to 124 lbs. (56.4 kg.)

Usage Features:

Assembly: Two persons are recommended for assembly. The manual provides step-by-step instructions with diagrams for connecting cart frames, attaching panels, installing casters, mounting doors and handles, securing the tank heat shield, placing the grill body, attaching side tables, installing the side burner control panel, and assembling the grease collecting tray and cup. Power tools should not be used unless explicitly stated, and fasteners should not be fully tightened until all parts are in place to prevent misalignment.
LP Gas Cylinder Installation: The LP cylinder must be stored outdoors, out of reach of children, and not in a building, garage, shed, breezeway, or any enclosed space. It should always sit in an upright position. The installation must conform to local codes or national standards (National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, etc.).
Leak Test: A leak test must be performed prior to each use and after assembly to ensure all gas connections are tight. A soap solution (one part liquid detergent, one part water) is applied to connections, and bubbles indicate a leak. The test should never be performed with an open flame or while smoking.
Lighting Instructions (Main Burner and Side Burner):
1. Read instructions before lighting.
2. Open the lid.
3. Ensure all control knobs are in the "OFF" position.
4. Turn ON the gas valve from the source or tank.
5. Push and turn any main burner or side burner control knob to "HI" and immediately press and hold the electronic ignition button.
6. If ignition does not occur within 5 seconds, turn the knob off, wait 5 minutes for gas to dissipate, and repeat the procedure.
7. Repeat for each burner individually.
8. To turn burners off, turn control knobs clockwise to the "OFF" position.
Match Holder Lighting: In case of igniter failure, a lighted match on the match holder can be used to light the burner.
Safety Warnings:
- Prop 65 Warning: Product may expose users to chemicals including benzene, known to cause cancer and birth defects.
- Do NOT operate in a building, garage, or any other enclosed area.
- Do NOT install on or in boats or recreational vehicles.
- Use OUTDOORS in a well-ventilated space.
- Maintain minimum clearances from combustible materials.
- Do NOT obstruct combustion/ventilation airflow.
- Do NOT leave unattended or use under the influence of drugs/alcohol.
- Keep fuel supply hose away from heated surfaces.
- Allow grill to cool before moving/storing.
- Household use only; not for heating.
- Never use natural gas in an LP unit.
- Do NOT store a spare LP gas cylinder under or near the appliance.
- Never fill the cylinder beyond 80% capacity.
- Do NOT connect to an existing #510 POL cylinder valve with left-hand threads.
- Do NOT connect to a propane cylinder exceeding its capacity or using any other type of valve connection device.
- Keep ventilation openings of the LP gas cylinder enclosure free from obstructions.
- Do NOT insert foreign objects into the valve outlet.
- Keep face and hands away from the burner when lighting.
- Do NOT move the grill when hot; lock wheels to prevent accidental movement.
- Wear protective gloves or oven mitts.
- Do NOT touch hot grill surfaces or wear loose clothing/allow hair near the grill.
- Side burner lid must be open when in operation.
- Have a type BC or ABC fire extinguisher available when cooking with oil/grease.
- Do NOT attempt to extinguish oil/grease fires with water; call the fire department.
- Cooking appliance must be on a level, stable, noncombustible surface.
- Do NOT move the appliance when in use; allow cooling to 115°F (45°C) before moving.
- Not intended as a heater.
- Turn off gas supply and knobs BEFORE cleaning burners.
- For LP cylinder filling, use qualified dealers and ensure the cylinder has a Type 1 valve and OPD.

Maintenance Features:

General Cleaning: Conduct periodically, especially at the start of the season. Keep the cooking area clear of combustible materials. Do not obstruct airflow.
Steel Surfaces: Use mild stainless steel cleaners and scrub in the direction of the grain. For scratches, use 100 grit emery paper. Remove baked-on grease with an abrasive pad and cleaner.
Grease Cup: Empty and wipe down periodically. Wash with mild detergent and warm water. Check frequently to prevent overflow.
Grill Burners:
- Clean burner tubes before assembly and at least once a month in late summer/early fall to prevent spider webs/insect nests, which can cause flashback fires.
- Inspect burners at least once a year or if flames appear yellow, the grill doesn't reach temperature, heats unevenly, or makes popping noises.
- Burner Cleaning Procedure: Turn off gas, ensure knobs are OFF, wait for grill to cool, open lid, remove cooking grate and heat distribution plate, remove cotter pin, lift burner out of firebox. Clean exterior with a brass brush and use a metal scraper for stubborn stains. Clear clogged ports with a straightened paper clip (never a wooden toothpick).
- Main Burner Replacement: Remove flame tamers, burner cotter pin, and burner from the grill body.
- Reinstalling Main Burners: Insert burner into burner valve, firmly seat valve connector into burner tube (straight), position main burner onto burner support, and reinstall burner fixing pin.
- Side Burner Replacement: Open side burner lid, remove side burner grate, remove burner fixing nut, and remove burner.
- Proper Burner Installation: Firmly seat the valve orifice into the burner tube, ensuring it's inserted STRAIGHT. Improper installation can lead to yellow flames, excessive noise, lifting, or flashback.

Warranty Information:

Coverage: This product is covered by Sam's Club Member Satisfaction Guarantee. Manufacturer warrants against defects in workmanship and materials for 90 days from the date of purchase, with proof of purchase required.
Replacement: Manufacturer offers to replace defective parts, provided they have not been improperly repaired, altered, or tampered with. Replacement parts are shipped at the original purchaser's expense.
Limitations: Warranty is limited to the original purchaser and terminates after 90 days. It does not cover incidental or consequential damages (loss of use, time, food, inconvenience, travel, personal property, income, profits, revenue).
Exclusions: Chips/scratches on porcelain/painted surfaces, rust/corrosion (not deemed a manufacturing defect), discoloration/loss of paint due to handling/heat/cleaning products, stainless steel discoloration/corrosion, and consumables (e.g., batteries) are not covered.
Customer Service: For assistance, contact customerservice@rankam.com or 1-888-837-1380 (Mon-Fri, 8:00am-5:00pm Pacific Standard time). Do not return the product to the store.
Manufacturer: Rankam (China) Manufacturing Company Limited, Address: 18/F, New Lee Wah Centre, 88 Tokwawan Road, Kowloon, Hong Kong.