EasyManuals Logo

Bimar VC95 User Manual

Bimar VC95
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14/48
INSTALLATION
After removing the packing materials, check the integrity of the heater; if you
are unsure, do not use it and ask for qualified professional help. The packing
materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the reach
of children because they are potential sources of danger.
Before connecting the appliance, check that the voltage values shown on the
data plate correspond to those of the electricity supply network. In the event of
incompatibility between the electric outlet and the plug of the heater, have the
outlet replaced with another more suitable type by professionally qualified
personnel, who will make sure that the section of the wires of the outlet is
appropriate for the absorbed power of the heater. In general, the use of adapters
or extension cords is not recommended; if their use is indispensable, they must
conform to existing safety standards and their current capacity (amperes) must
not be less that the maximum of the appliance.
The power socket must be easy to reach so the plug can be removed quickly in
case of emergency.
Beforeeach use, checkthattheequipmentis in goodcondition, and thatthepower
cable isnotdamaged: if in doubtconsult a qualifiedprofessional.
Place theappliancefarfrom
- Heat sources (e.g.flames, gas stoves etc.)
- container of liquids (e.g.sinks etc) to avoid any spray or the appliance
falling into it (minimum distance of 2 meters)
- fabrics (curtains, etc.) or unstable materials that could obstruct the air
intake grille; make sure that the front is free of unstable materials (dust,
etc.).
The surface on which the appliance is placed must be stable, level (otherwise
the unit may fall over) and smooth. Do not place the fan on shelves. Do not hang
the unit on the wall.
This appliance is not intended to be operated by means of an external timer or
a separate remote control system, to avoid the risk of fire in case the device is
covered or is positioned incorrectly.
Do not connect to thermal control systems or a programmer or timer or other
device that can automatically turn on the unit, thus avoiding the risk of damage
to people, animals or property.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bimar VC95 and is the answer not in the manual?

Bimar VC95 Specifications

General IconGeneral
TypeHousehold tower fan
TimerYes
PlacementFloor
Fan diameter- mm
Product colorWhite
Number of speeds3
Height adjustment-
Timer duration (maximum)7.5 h
AC input voltage220 - 240 V
Power source typeAC
AC input frequency50 Hz
Power consumption (typical)60 W
Weight and Dimensions IconWeight and Dimensions
Depth181 mm
Width234 mm
Height830 mm

Related product manuals