BIN WAREHOUSE 12-TOTE COMPACT User Manual

12-TOTE COMPACT MODEL ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED
1. Powered Screwdriver with
#2 Phillips-Head Tip
PARTS LIST
1. (8) Horizontal Crossbars
2. (4) Center Verticals
3. (2) Left & Right Rear Corner Verticals
4. (1) Left Front Corner Vertical
5. (1) Right Front Corner Vertical
6. (4) Wall Mount Flanges
7. (4) Wall Mount Extension Tubes
8. (12) Horizontal Sliderails
FASTENER LIST
1. (60) #06 x 1/2" Fastening Screws
2. (08) #08 x 3/4" Wall Mount
Extension Tube Fastening Screws
3. (12) #10 x 1-1/2" Wall Mount
Flange Screws
4. (12) Plastic Wall Anchors
TIP
Separate All Parts into Groups
(as shown) and Familiarize.
Read All Instructions Before
Beginning Assembly.
#1
#2
#3 #4
#4
#3
#5
#2
#1
#6
#7
#8
Solutions Murales PROSLAT inc.
225 Industriel blvd
Chateauguay (QC) J6J 4Z2
1 888 691-2944

BIN WAREHOUSE 12-TOTE COMPACT Specifications

General

Brand	BIN WAREHOUSE
Model	12-TOTE COMPACT
Category	Racks & Stands
Language	English

Summary

Front Grid Assembly Instructions

Step 1: Prepare Front Grid Components

Identify and gather the required parts for the front grid assembly, including horizontal crossbars and center verticals.

Step 2: Assemble Front Grid Structure

Insert horizontal crossbars through center verticals, ensuring alignment dimples are correctly oriented.

Step 3: Attach Front Corner Verticals

Place left and right front corner verticals onto the assembled horizontal crossbars.

Rear Grid Assembly Instructions

Step 1: Prepare Rear Grid Components

Gather the necessary parts for the rear grid assembly, including horizontal crossbars and center verticals.

Step 2: Assemble Rear Grid Structure

Insert horizontal crossbars through center verticals, ensuring proper alignment with dimples.

Step 3: Attach Rear Corner Verticals

Position the left and right rear corner verticals onto the horizontal crossbars.

Sliderail Installation Guide

Step 1: Insert Sliderails into Rear Grid

Insert the horizontal sliderails into the rear grid structure, ensuring they are fully seated.

Step 2: Fasten Sliderails to Rear Grid

Secure the sliderails to the rear grid using provided fasteners, working from top to bottom.

Step 3: Final Sliderail Securing

Confirm all horizontal sliderails are fastened to the rear grid using fasteners in the bottom hole only.

Joining Front and Rear Grid Sections

Step 1: Insert Bottom Sliderails

Insert the bottom sliderails into the front grid assembly and fasten them securely.

Step 2: Fasten Remaining Sliderails

Insert and fasten the next rows of sliderails to the front grid assembly using fasteners.

Step 3: Position Unit Against Wall

Turn the unit upright and place it firmly against the wall where it will be mounted.

Verticals and Wall Mount Tube Fastening

Step 1: Secure Verticals to Horizontals

Fasten all verticals to horizontals, ensuring joints are tight and aligned.

Step 2: Attach Wall Mount Extension Tubes

Insert and fasten wall mount extension tubes into the designated locations on the unit.

Step 3: Position and Mark Wall Flanges

Slide wall mount flanges into tubes, position unit, and mark holes on the wall for mounting.

Securing Unit to Wall

Wall Mounting Procedure

Mount wall flanges to the wall using screws and anchors, then reattach the unit to the mounted flanges.