BIN WAREHOUSE DFAE2MBFBW0618 User Manual

#1
#3
#2
#1
#2
#3
#4
#5
#7
#6
48 x
8 x
8 x
Solutions Murales PROSLAT inc.
225 Industriel blvd
Chateauguay (QC) J6J 4Z2
1 888 691-2944
US Patent No: 6,315,136B1 All rights Reserved
International Patents Pending
8 tote or file box storage system – assembly instructions
TOOLS REQUIRED
1. Powered Screwdriver with #2
Phillips-Head bip
PARTS LIST
1. 8 x Horizontal crossbars
2. 2 x Center verticals
3. 4 x Corner verticals
4. 6 x Vertical top caps
5. 4 x Front and rear grid
connecting tubes
6. 4 x Wall mount brackets
7. 8 x Horizontal slide rails
FASTENER LIST
1. 48 x #06 x ½” fastening screws
2. 08 x #10 x 1-¼” fastening screws
3. 08 x Plastic wall anchors
NOTE
Separate all parts into groups
(as shown) and familiarize. Read
all instructions before beginning
assembly.

BIN WAREHOUSE DFAE2MBFBW0618 Specifications

General

Brand	BIN WAREHOUSE
Model	DFAE2MBFBW0618
Category	Storage
Language	English

Summary

Front Grid Assembly

Step 1: Insert Crossbars

Insert horizontal crossbars into center vertical, aligning dimples for proper fit.

Step 2: Attach Corner Verticals

Insert two corner verticals into the assembled horizontal crossbars.

Rear Grid Assembly

Step 1: Insert Crossbars

Insert horizontal crossbars into center vertical, aligning dimples.

Step 2: Place Corner Verticals

Place two corner verticals onto the horizontal crossbars.

Slide Rail Assembly

Step 1: Insert Slide Rails

Insert eight horizontal slide rails into the rear grid assembly.

Step 2: Fasten Slide Rails

Fasten slide rails using screws, starting from the top row.

Joining Front and Rear Grids

Step 1: Connect Grids

Join front to rear grid by inserting four connecting tubes.

Step 2: Fasten Slide Rails

Insert and fasten eight slide rails into the front grid assembly.

Step 3: Position Unit

Turn the unit upright and place it against the wall.

Securing the Structure

Fasten Connecting Tubes

Fasten connecting tubes to the front grid assembly using screws.

Ensure Squareness

Verify unit is straight, square, and verticals are aligned.

Fasten Verticals to Horizontals

Secure all verticals to horizontals with screws.

Wall Mounting and Finishing

Attach Wall Brackets

Place wall mount brackets over rear verticals and fasten to wall.

Install Top Caps

Insert decorative top caps into all vertical supports.