Bio-Tek FL600 - Electrical and Optical Characteristics

5-2
Technical Information
(OHFWULFDO6SHFLILFDWLRQV
Fuse 5.0 amp, time-delay T, glass, 5 mm x 20 mm, 250 volt-type
(Part Number 46055)
Input Voltage 90-132 volts AC
180-240 volts AC
47-63 Hz, 525 VA max
The power supply has a auto ranging power input.
Internal Voltages ±15 volt DC, +24 volt DC, +5 volt DC,
-950 volt DC
2SWLFDO6SHFLILFDWLRQV
Lamp Type M32-Type, Tungsten-Halogen, 75 watt
optically stabilized lamp in fan-cooled assembly
Lamp Life 2000 hours minimum
Excitation Range 300 nm - 650 nm filters
fitted in a motor driven wheel assembly
Emission Range 350 nm - 750 nm filters
fitted in a motor driven wheel assembly (complete
with photomultiplier)
Absorbance Range 340 nm - 750 nm filters
Filter Wheel 6 positions
Detector Photomultiplier Tube
Probe Diameter The fully randomized Quartz fiber bundles are
available in four sizes to meet user needs. Different
probes can be fitted to the upper and lower positions
at the factory.
5.0 mm general purpose probe for all media up to
96 wells.
3.0 mm general-purpose probe suitable for media up
to 96 wells