To Next Page
N
natashasalazarAug 6, 2025
What to do if Biobase BOV-V65F shows '-------' on display?
- LLisa PorterAug 6, 2025
If your Biobase Oven is displaying '-------', it indicates that the sensor is broken and needs to be replaced.
What to do if Biobase BOV-V65F shows '-------' on display?
If your Biobase Oven is displaying '-------', it indicates that the sensor is broken and needs to be replaced.
Why is my Biobase BOV-V65F Oven not heating up?
If the temperature isn't rising inside your Biobase Oven, several factors could be responsible: * The set temperature might be too low. Try readjusting and setting the desired temperature. * The heater could be broken and require replacement. * A faulty temperature controller may be the cause, in which case, it should be changed. * The temperature sensor might be loose; ensure it is screwed in tightly. * The temperature sensor itself could be defective, necessitating a replacement.
How to fix Biobase Oven when it doesn't have power?
If your Biobase Oven isn't receiving power, the issue might stem from a poor connection of the plug or a break in the power line. Ensure the plug and line are securely connected. Alternatively, the fuse protector may be broken, requiring a replacement.
What to do if Biobase BOV-V65F Oven temperature cannot reach setting point?
If your Biobase Oven's temperature is failing to reach the set point, it could be due to: An exhaust port that is fully opened. Shut off the exhaust port. The container being overfilled, which prevents proper hot air convection. Decrease the amount of sample to improve convection.
What to do if Biobase Oven fan doesn’t work?
If the fan in your Biobase Oven isn't working, it could be due to a broken fan motor. Stop using the oven and check the electric capacity and the motor itself.
How to resolve no temperature rising alarm in Biobase BOV-V65F?
If there's no temperature rising alarm in your Biobase Oven, check if the set temperature of the detached temperature limiter is low. Readjust the temperature to 30? above the setting temperature. Alternatively, the detached temperature limiter sensor might be broken and needs to be replaced.
What to do if Biobase Oven displays STOP?
If your Biobase Oven displays 'STOP', it means the time is up. Press the program key for 3 seconds to start the oven.
General| Temperature Fluctuation | ±0.5°C |
|---|---|
| Temperature Uniformity | ±1°C |
| Volume | 65L |
| Shelves | 2 |
| Voltage | 220V |
| Timer | Yes |
| Material | Stainless Steel |
| Timing Range | 1-9999min |
| Power Supply | AC220V 50Hz |
